in batteries
reasonable method Without the formation SiO2 and Can we reduce SiO2 to Si by any reducing agent?
01 January 1970 5,381 0 View
Are Metal oxide-GO nanocomposites better then metal oxide-rGO nanocomposites for Lithium ion battery? How differently they affect the lithium ion battery performance?
01 January 1970 2,850 6 View
why lower potential barrier is set as 1.0 V for TiO2 as anode for Lithium ion batteries? what happens when is charged till 0.1 V? Generally, potential window for anodes for LIBs is 0.1 to 3.0 V....
01 January 1970 8,738 4 View
here I am taking ammonium molybdate as precursor, citric acid and sodium sulfide or H2S.
01 January 1970 5,910 0 View
temp varying from room temp to 800C how it is dependent on pH of the solution.
01 January 1970 4,014 5 View
how heteroatom modification or doping of metal oxides or graphene enhances the performance of the lithium ion battery?
01 January 1970 6,407 2 View
insertion of lithium ions in case TiO2
01 January 1970 4,017 3 View
On implementing metal oxide as a photo-catalyst for dye degradation and on varying the pH of the solution, the catalyst gains positive or negative charge..!! What is the chemistry behind the...
01 January 1970 799 3 View
I want to reduce the carbon dioxide (CO2) to carbon (C) and oxidize the C to CO2 back either electro-chemical or photo-chemical method. I am in search of suitable material which has duel nature...
01 January 1970 881 8 View
I imagine the battery drives the graphite into a carbocation, then chloride is oxidized to donate the electron to the carbocation, but what pushes the lost electrons of chloride to be shared...
03 August 2024 5,384 0 View
Regarding a model for simulating battery charge and discharge, what do you consider to be high fidelity? What is the acceptable percentage of error (regardless of the metric)? Could you suggest...
03 August 2024 5,358 0 View
I am an Mphil research student and looking for high impact factor battery related journals to download and read research articles to improve my knowledge and get new ideas in the field of battery...
01 August 2024 6,516 2 View
Dear all! Oxygen vacancies do raise negatively the Fermi level by increasing the negative charge in the semiconductor crystal structure. In the case of n-type semiconductors, I wonder if this...
30 July 2024 8,339 2 View
Hello, I'm trying to measure the conductivity of semiconductor films but since I don't have a commercial four point probe set up I would like to build one on my own in my lab. I have generators,...
30 July 2024 906 2 View
I have attached the charging curve from the battery tester for review. I need help on what is happening
21 July 2024 6,898 2 View
I need to plot cycle number vs. capacity with multicurrent density. please let me know if my steps are right or not as the below picture
14 July 2024 7,702 2 View
Would an average spot welder suffice for welding tabs for pouch cell electrodes instead of an ultrasonic one? Why would an ultrasonic welder be better than a regular spot welder?
10 July 2024 8,763 0 View
I tried to make slurry for NCM cathode but there was problem in coating process. The detail of my experiment is following; The ratio between active material(NCM811), conductive additives(Super-P)...
08 July 2024 7,327 4 View
Hi Dear All I would like to simulate a mode locked semiconductor laser. Does anyone know what is the best software to do it?
06 July 2024 1,648 4 View