HEAs, CNTs
Yes. Recently few research are started on this.
High Entropy alloys are considered as a breakthrough in the present generation of materials science but what if all metals(in solid state) in periodic table would have been mixed, would that still...
02 March 2019 9,290 8 View
Particle stimulated nucleation
11 December 2018 8,064 0 View
Hypereutectoid steels Grain boundary structure
09 October 2018 6,981 0 View
It is already known that metal carbides, oxides and nitrides possess crystal structures which do not have sufficient slip systems for dislocation movement during plastic deformation. However,...
06 July 2018 4,739 5 View
its simply known that in in binary alloys, during eutectic solidification,if we consider alpha(A rich) solid solution then it grows by diffusion of A atoms which are found to be rich in...
05 June 2018 1,521 4 View
Although the reverse phenomenon is expected to be observed...
05 June 2018 8,687 6 View
CNTs
05 June 2018 939 2 View
Solidification
31 December 2017 5,026 0 View
powder metallurgy
11 December 2017 2,735 2 View
Related to slag chemistry in ironmking
10 November 2017 1,549 4 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 942 3 View
How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?
09 August 2024 3,291 2 View
I did PR spin coating on trench structure. I used AZ P4620 PR and the thickness or PR is around 11um. The substrate is Si. And my trench structure depth is 141um(negative way). Even though I...
08 August 2024 2,298 0 View
Hello dear colleagues, We have prepared a manuscript on NiTi-based alloys and are seeking a second opinion on our current TEM results. If you are a Ph.D. holder with experience in TEM and have...
07 August 2024 9,563 0 View
I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.
07 August 2024 4,526 4 View
Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...
06 August 2024 8,716 0 View
How select composition for ods-high entropy alloys?
31 July 2024 2,795 1 View
The starting material is a finely ground powder. Some particles contain more graphene than others.
30 July 2024 3,978 2 View
I am currently working on modeling FCC catalyst regeneration and have come across a point of uncertainty that I hope you can assist me with. In my previous models, I have utilized lumped kinetics...
30 July 2024 6,137 0 View
