Can anyone provide excellent references to study fundamentals of the external quantum efficiency (EQE) of solar cells?

Need explanation regarding the basic formula and mathematical expression of EQE in term of short-circuit current (Jsc)

04 May 2018 7,920 6 View

Need references to write about solar energy?

I would like to get some references to compare solar energy (photovoltaics) to other renewable energy resources.

04 May 2018 3,711 3 View

Does scattering cross-section of metal nanoparticle incorporated in solar cell depend on the active layer thickness?

In plasmonic solar cells, absorption enhancement is mainly related to its active layer thickness. A thin active layer with metal nanoparticles (NPs) provides an efficient absorption...

09 October 2017 7,823 3 View

What is the reason behind the Fill factor enhancement of a plasmonic organic solar cell?

04 May 2016 3,612 3 View

Solar cell parameter extraction from a single I-V curve?

I wrote a Matlab program to extract solar cell parameters (Rs, Rsh and n) from a single I-V curve using a simple diode model utilizing Lambert W equation [See the reference below]. I have found...

03 April 2016 3,449 10 View

How can we effectively spin coat silver nanoparticle solution on top of ITO?

For the fabrication of organic solar cell with Ag nanoparticles, how can I effectively spin coat Ag NPs on top of ITO substrate. I have synthesized Ag NP and washed and stored into ethanol.

02 March 2016 6,057 2 View

How can we compare optical absorption of two thin films?

If we make thin films by spin coating method, even we kept same RPM and Time for rotation, the thickness of both will be different. Then how can we compare absorption enhancement the thin film...

01 February 2016 6,252 2 View

How can we minimize the potential barrier at active layer/electrode junction by making an ohmic contacts?

11 December 2015 1,207 4 View

How does XRD peak intensity relate to facets of nanocrystals?

In the case of silver nanocubes intense XRD peak is the (200). This intense peak is explained due to the presence of {100} facet. How these are...

09 October 2015 566 2 View

How can I change wavelength vs absorbance spectrum taken from UV-vis spectrophotometer into wavelength vs extinction coefficient?

What is the relation between absorbance and extinction coefficient?

08 September 2015 3,772 4 View

Is There Any Feasible Method To Test Fluorescent Compounds Other Than Fluorescence Spectrometers ??

Is There Any Feasible Method To Test The Efficiency Of Fluorescent Compounds Other Than UV Spectrometers ? Suggestions Would Be Appreciated !

02 March 2021 5,785 3 View

Any research papers for extraction of nutrient deprivation on macroalgae? Analysed by HPLC-UV and GC/MS. Possibly from macroalgae genus Rhizoclonium?

I am doing my thesis on the nutrient deprivation on the macroalgae Rhizoclonium sp. I will be analysing the levels over a period of roughly 5 days by HPLC-UV and GC/MS. I will be using seawater as...

28 February 2021 6,477 1 View

Why initial concentration of Pb not the same as calculated one when testing using AAS?

I am currently doing research on the adsorption of heavy metal using magnetic reduce graphene oxide. I use AAS to determine the concentration of the heavy metal. I prepare the Pb solution with...

26 February 2021 9,580 4 View

Is this the write procedure for acid digestion of soil for heavy metal analysis using AAS?

How to do acid digestion of soil sample with 3:1 aquaregia in an open vessel?

23 February 2021 3,053 7 View

How can I simulate the optical absorption spectrum of a biomaterial (like DNA or protein) in COMSOL?

I need to simulate the optical properties of a biomaterial, namely DNA, in COMSOL. Basically I need to simulate the IR absorption spectrum of a cylinder filled with a 'concentration' of DNA. I am...

21 February 2021 3,043 3 View

In methylene blue test Why is UV absorbance reading very low as soon adsorbent is added and then increasing before reaching equilibrium?

Hello, I'm working on removal of methylene blue. 01. in the dark test very first reading is taken 15 minutes after adding adsorbent to the dye solution and that UV absorbance reading is very...

19 February 2021 472 5 View

Can I measure absorbance efficiency with wavelength in a spectrophotometer?

I measure the wavelength of material in a spectrophotometer and it peaks at 275 and its absorbance is 100. I mix it with an adsorbent and it adsorbs the first material, but when I measure the...

16 February 2021 7,515 5 View

Unusually Busy Raman Background?

Hello, I am observing a nearly periodic background spectrum for a wide variety of SERS substrates. I see this response (attached below) for bare Au films, Cu films, and Au nanoparticles on...

15 February 2021 9,922 5 View

How to determine the drug loading and the drug release capacity of a polymer micelle using UV spectroscopy?

Currently, I am working on PLA-PEG copolymer micelle for the drug delivery system. I have seen several papers where some researcher talks to centrifuge the drug-loaded micelle to separate the...

13 February 2021 5,822 7 View

CAT assay in microplate?

I'd like to know if anyone can provide me with a protocol for traditional catalase enzymatic assay in a 96 well microplate, for cell line and/or C.elegans spectrophotometric measurements. Thanks!

11 February 2021 7,273 3 View