Is it possible to do electrospinning at vacuum and/or zero gravity? Will the nano fiber formation happen on the deposition plate under this condition?
Yes both possible.
Gravity has limited effect on the spinning, high voltage/charge drives the fibers to the plate. You will find many people spinning upwards.
A. Greiner published melt-electrospinning in vacuum.
the most influential in electrospinning is high voltage, so both of them are possible.
Hello. Sure. It is possible.
hi, I think it is not possible. because more difficult for an accumulation of nanofibers on the collector .
If you use a polymeric solution, electrospinning in a vacuum is impossible. but in melted polymer, it is possible and due to Laplace pressure you have a uniform nanofiber.
Usually, additive manufacturing techniques like SEBM, SLS, and SLM are used for interconnected porous lattice structure generation with sizes of >100–200 micrometers. Can the Fused Deposition...
09 August 2024 7,892 0 View
there can be some triggering situations, how do you handle them?
18 July 2024 7,076 3 View
I need the crystallinity percentage value of crosslinked polyethylene (PEX-A). I know that they have more than 70% crosslinking. Is there any way to calculate the crystallinity percentage from...
22 April 2024 3,007 0 View
I have optimised the geometry of the dimer of a molecule using pcm solvent model and B3LYP functional with 6311++G(d,p) basis set in Gaussian 09 software. There is possibility of C-H...O H bonding...
01 April 2024 1,820 1 View
This question seeks to explore the techniques for inducing drought stress in rice plants in laboratory conditions and methods for accurately assessing the resulting MPa stress levels. It aims to...
17 March 2024 5,840 0 View
For the morphometric analysis of a basin, I need to measure length of the basin (Lb) using ArcGIS.
13 January 2024 4,151 1 View
Hi, I intend to give mice 150 mg/kg of pyrazinamide. I need 3.7mg per mice and 100ul needs to be administered. The drug only dissolves in DMSO and the final amount of the DMSO in water exceeds...
27 September 2023 6,416 0 View
The PL int will be higher in the case of Fl, but both are supposed to overlap. Then how do know if the system has delayed Fl emission?
05 September 2023 3,068 4 View
Image Ref : The Telegraph Online ( 16.06.18 )/ 19.07.2023.
18 July 2023 397 8 View
Sodium Phosphate manufacture uses sodium dihydrogen phosphate and disodium hydrogen phosphate. PBS manufacture uses pottasium ohosphate monobasic, sodium phosphate dibasic and sodium chloride....
03 April 2023 1,039 2 View
Is anyone here using the Thermo Fisher Nano Orange kit for protein quantification, and detecting the fluorescent signal on the Promega Quantus? We are struggling to make sense of the standard...
05 August 2024 8,946 3 View
How can the rubber fibres produced by the electrospinning device be removed from the fibre collector (aluminium foil) without affecting the orientation of the rubber fibres for use in reinforcing...
26 July 2024 8,281 0 View
Hi there, I'm new to modelling with comsol. I would like to ask if it is possible for comsol to output linearly polarized (LP) modes? I tried modelling a simple single mode fiber with an enlarged...
23 July 2024 4,019 3 View
I'm having a bubbling error while splicing 100/350 um optical fiber (core/cladding) on the Fujikura FSM100P+. I have tried some ways such as changing Prefuse power and Prefuse time but to no...
03 July 2024 7,463 6 View
Some scientists use nano nitrogen and some use nano urea, even though the process used the same for preparation. So, which is true nano nitrogen or nano urea?
28 June 2024 2,885 6 View
I am trying to visualize Nemaline Rods in Skeletal Muscle fiber cross sections. I have read about 10 different gomori protocols, and the protocol seems very straightforward. Every paper I read on...
27 June 2024 5,423 2 View
fiber powders will be used as a reinforcement.
23 June 2024 10,027 3 View
I tried to prepare aligned PLLA nanofibers by gap electrospinning method. But after the deposition, when I tried to measure its piezoelectric sensitivity, it actually did not exhibit any...
17 June 2024 9,763 0 View
a) Design a scalable and robust network architecture that can handle the increasing data traffic and support various communication technologies. b) Recommend suitable transmission technologies,...
10 June 2024 2,187 1 View
I use rapid timm staining for mossy fiber. I follow the protocol but I got these bubbles any ideas?
07 June 2024 1,528 0 View