Is it possible to coat PEDOT:PSS on Nickel?

Song Honggeun @Song-Honggeun

03 June 2025 0 8K Report

I need to know coating PEDOT:PSS on Nickel is possible or not.

I will use dip coating.

Also, if it's possible, I want to know how to control the thickness of it.

Badges
Science topic

More Song Honggeun's questions See All

What is the meaning of Duhkin length?

I work in the field of nanofluids. While reading literature I come across the concept of "Duhkin length", I currently only know the meaning of Debye length in this area. Could you explain the...

29 May 2024 3,530 1 View

Issues with interactions in a linear mixed-effects model?

Seeking assistance: I'm in need of assistance with my analysis. I'm currently conducting a study utilizing a linear mixed-effects model with a 2x3 repeated measures design. Upon examining the...

16 May 2024 8,226 2 View

How to solve Pulsed Nano-Electrospray Ionization Corona discharge occurs?

May I ask if there is a scholar to help me solve the problem? There is an obvious blue discharge phenomenon at the tip of the glass capillary tube. The diameter of the glass capillary tube is...

14 May 2024 1,592 2 View

How to simulate plasma jet by COMSOL?

In COMSOL, how to use the gas concentration distribution results obtained by steady-state calculation as initial condition for plasma module for subsequent calculations? The commonly used data...

09 May 2024 7,335 0 View

What are the appropriate pH and temperature conditions I should use for the EDC/NHSS coupling reaction of the amino and carboxyl groups?

I want to attach some chemical molecules to my substrate, and I need to use the EDC/NHSS coupling reaction between the amino group and the carboxyl group. However, my first experiment failed, so I...

23 April 2024 3,953 6 View

How to calculate the Free energy in a coarse grained molecular dynamics?

In a coarse grained model, such as DPD (dissipative particle dynamics) or MD(molecular dynamics), how to calculate the entropy and the interaction energy so to calculate the free energy?

19 April 2024 3,489 3 View

What is the difference between PIC/MCC and fulid model?

From bolztmann equation to Fulid model or Drift-Diffusion model, What assumption we made? such as maxwell distribution or local thermal equilibrium.

08 April 2024 1,968 1 View

When cultured optimum pH AOB(Ammonia Oxidation Bacteria)?

AOB (Ammonia Oxidation Bacteria) was cultured pH 7.8(NaOH), NH4Cl medium A few hours later change pH 8.8. Does pH usually rise after culture?

31 March 2024 4,899 0 View

How to sterilize the Alginate bio-ink?

Hi guys, I am trying to prepare Sodium alginate bio-ink (2 - 3%) for extrusion bioprinting. I will include some cells in to it. Can anyone suggest me how to sterilize inks for cell culture? Thank...

27 February 2024 6,204 2 View

How to report Gabor patches' contrast?

I'm writing the manuscript on an experiment using Gabor patches that were created based on the function and code shown in the images (from the Book 'Visual Psychophysics' by Zhong-Lin Lu & Barbara...

11 December 2023 265 1 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

How do I conformally do PR spin coating on trench structure?

I did PR spin coating on trench structure. I used AZ P4620 PR and the thickness or PR is around 11um. The substrate is Si. And my trench structure depth is 141um(negative way). Even though I...

08 August 2024 2,298 0 View

Why do i have a weak plasma and no coating during rf sputtering?

I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.

07 August 2024 4,526 4 View

What is the reason I get 400nm nanoparticles using an extruder with 200 nm membrane for cell membrane coating?

I am trying to coat my micelles and PLGA based nanoparticles with cell membrane using an Avanti mini extruder according to literature . I use 200nm membrane but my particles end up to be 400nm And...

30 July 2024 3,294 3 View

What is the main used curing agent for epoxy based coating?

I am trying to coating metal oxide into steel substrate, for better sticking planning to utilse epoxy based, Could you please suggest suitable curing agent for the coating purpose

25 July 2024 438 3 View

How do you get pure primary macrophage cell culture?

I have been harvesting monocyte-derived macrophages from buffalo and cattle fresh whole blood using the same protocol for years and getting good macrophage cultures. Below is the protocol that I...

23 July 2024 4,074 2 View

Issues in coating of cathode material on Al foil, why we are not getting proper coating and results when the cathode was coated on Al-foil..?

We are trying to coat some cathode materials on Al-foil ( ex - LiFePO4 , S@CNT, etc). When we coated the Al foil with the cathode (ex - S@CNT) material , the cycling result was annoying. But the...

09 July 2024 5,123 4 View

Why NCM cathode slurry has coating problem?

I tried to make slurry for NCM cathode but there was problem in coating process. The detail of my experiment is following; The ratio between active material(NCM811), conductive additives(Super-P)...

08 July 2024 7,327 4 View

Why there are no peaks at downfield NMR of Cobalt and Nickel complexes?

I synthesized some paramagnetic cobalt and nickel complexes (expected to be Co(II) and Ni(II)) using a bidentate ligand - N of pyridine ring (aromatic) and O of P=O (aliphatic), and I obtained...

03 July 2024 3,410 4 View

Why can't we get on top of this incubator infection (fungal)?

We have been experiencing repeated what looks very much like fungal contaminations in several incubators (in the same lab). We have tried the following repeated times and yet the coating on all...

02 July 2024 6,375 2 View