In perovskite/silicon tandem is there a advantage of using IZO (Zn doped tin oxide) instead of conventional ITO?

05 June 2023 0 662 Report

Many researchers are using IZO as transparent conductive oxide instead of ITO in perovskite-silicon tandem , what is the motivation behind this?

thank you

Badges
Science topic

More Dinesh Beniwal's questions See All

if we are doing non-invasive sensing in patient urine then required ethical permission or not???

if we are doing non-invasive sensing in patient urine then require ethical permission or not??? If we have a consent form fill with the patient then it is sufficient or not???

24 May 2024 956 0 View

How to synchronize the lock-in amplifier with the signal and reference photodiodes for Z-scan measurements of liquid samples?

Hello everyone, I am first time using lock-in amplifier and based on the information I got from the internet to synchronize the two photodiodes with lock-in, the output signal must be zero...

18 February 2024 7,120 1 View

Why is the potential window of GCD not following that of Cyclic voltammetry?

My CV profile shows redox peaks at around -0.3V in the potential window -0.7 to 0.3V. But in GCD, the discharge curve is not going below -0.25V. If the potential window of GCD is followed i.e....

29 January 2024 9,836 3 View

Vulcanization of butyl rubber at Room Temperature ?

Can we partly cure Butyl rubber sealant formulation at room temperature in 10-15 days time. The purpose of adding a curing system in the formulation is to add the tensile in the product without...

24 January 2024 3,285 3 View

How can we make zinc disorbate ?

Hi Can anybody help us to know how we can make zinc disorbate ?

23 January 2024 3,884 1 View

How to avoid the particle growth in suspension without surfactant?

Since its multidose injection, we have benzalkonium chloride as preservative in formulation. we knew that benzalkonium chloride also act as cationic surfactant. During stability, How to avoid the...

01 January 2024 2,610 3 View

Can someone kindly explain the increase in capacitance retention after 1000 cycles?

In my study I have observed that the capacitance retention rate after 1000 charging-discharging cycles increased beyond 100%. can anyone kindly provide insight in this regard. Thank...

21 December 2023 2,848 1 View

Neocuproine method for copper analysis ?

The amount of reagents to be taken

02 December 2023 3,481 0 View

How can we decide the amount of copper sulphate be taken to prepare a stock solution in 1litre of water ?

procedure of preparation

19 November 2023 4,484 1 View

Microwave image in brain tumor?

brain tumor detection and classification

22 September 2023 5,109 1 View

What is the best conditions for formation Magnetite ore deposits?

I want to know more about Magnetite deposits.

06 August 2024 1,066 0 View

In the presence of VERY high concentration (1000 ppm) of silicon, the adsorption isotherms of arsenic are showing anomalous trends, why so?

I conducted an adsorption experiment of arsenic on soil in the presence of different doses of silicon as competing ions to see the effect of silicon on arsenic adsorption and desorption. I took 5...

03 August 2024 6,500 3 View

Short Synthesis of Graphene Oxide from Natural Graphite Flakes?

I am in search of a modified Hummer's method, which can be used to synthesis graphene oxide within 6-8 hours. As I am a student it is not allowed for us to work after 5 in the laboratory. So I am...

01 August 2024 8,368 2 View

What is the ionic radius of Hydrogen anion? And how to know the exact ionic radii of the elements?

I'm trying to calculate the tolerance factors of the hydride perovskite and the value calculated by me and the reported values are contradictory. Need more clarity in using the correct ionic radii...

01 August 2024 2,614 1 View

What is the solubility of Iron (+3) in Bismuth Oxide?

Dear all: I am modifying Bismuth Tungstate with Hematite (Fe2O3), so I would like to know about how much Iron(+3) can form a solid solution in a Bismuth Oxide matrix. Best wishes Marco

29 July 2024 2,163 1 View

A twin-shaft kiln or a rotary kiln for lime production 1 class? if compressive strength of limestone is low 60 MPa?

My research work is related to the calcination of limestone. I have a complex question and would like to consult with experts in this field. Could you please advise which kiln to choose (a...

18 July 2024 1,390 2 View

How to determine the position of occupancy of the dopant? - whether it is doped in tetrahedral or octahedral site?

Suppose a material "A" has both tetrahedral and octahedral sites and we are doping another material "B" - usually an ion into it. How can we detect if the dopant has occupied the octahedral site...

17 July 2024 4,299 4 View

Could Nd doping into TiO2(anatse) because Nd's dense diameters are bigger than in TiO2 ?

could Nd (Neodimyum) doping into TiO2 because Nd's dense diameters are bigger than in TiO2

11 July 2024 2,350 2 View

How to add channel doping variation in sentaurus tcad to see its effect on transfer characteristics of mosfet?

I am getting trouble in studying the effect of channel doping variation in forksheet structure for p and nmos.

08 July 2024 2,074 0 View

Can some indicate a technique - or approach - to measure the thickness of a 20µm film and thickness with water uptake?

Hi, I need to measure the real-time (or temporal intervals) thickness variation of a transparent material from dry to wet/humid conditions, however, I cannot use the following techniques: -...

08 July 2024 4,799 4 View