How can I find plastic propertis and ductile failure data for AL7075 using in abaqus property module?

04 May 2017 3,760 2 View

Can anyone suggest a useful reference /video or website about Johnson-Cook Material Model, Abaqus Explicit?

I am currently running an impact simulation of AL7075-T6 in Abaqus Explicit using the Johnson-Cook Plasticity option. I need to know the theory of johnson-cook modeling and melting and transition...

10 November 2016 595 0 View

How can I get some similar examples like modeling of a projectile ballistic motion in Abaqus?

07 August 2016 3,952 2 View

How can we model a projectile that is released from a launcher using Abaqus?

06 July 2016 7,236 1 View

Will The high Temprature during ultrasonic process (dispersing) of nanoparticles and resin epoxy destroy the end composite or not?

05 June 2016 1,139 1 View

Can anyone explain the toughening mechanism induced by the S-CSR particles in an epoxy polymer?

02 March 2015 2,493 3 View

How can we model a single lap joint of an adhesive joint in ABAQUS?

02 March 2015 2,634 3 View

How does the core shell rubber nanoparticle effect on the mechanical properties of adhesives and epoxy resin?

1) which of mechanical properties are affected? 2) How are they affected?

31 December 2014 4,255 6 View

I need to image mesoporous silica nanoparticles that are in ~100 nm size and do high resolution TEM to look at mesopores. what grids should I use?

Need to image mesoporous silica nanoparticles using the TEM. Also, need high resolution TEM images to see the mesoporous structure. Kindly suggest what kind of grids to use. Thanks, Shatadru

02 March 2021 1,787 2 View

How optimize the Size Exclusion Chromatography?

Hello! I'll do a size exclusion chromatography, but I only have an open column, and I'll perform the peptide extraction from yeast, using buffer lysis (sodium phosphate 50 mM/NaCl 30 mM/DNAse and...

01 March 2021 2,215 2 View

What thickness need for ITO to use as conductive layer?

I want to do RF sputtering of ITO on glass substrate using magnetron sputtering. what thickness do i need to make it good conductive layer to use it for PSC. Moreover, whats about thickness of...

01 March 2021 395 3 View

Can chitosan alone can act as a reducing agent for Cu(0) nanoparticle sythesis?

[Synthesizing Cu nanoparticles without using chemical reductants]

01 March 2021 8,359 1 View

What are the new 2D nanomaterials were used for Silver nanoparticles stabilization?

In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...

01 March 2021 2,207 3 View

What is the state of the drug inside solid lipid nanoparticles (SLNs)?

I am a little confuse with the mechanism of solid lipid nanoparticles (SLNs). The main point of encapsulating drugs into SLNs is because some drugs have low solubility in water. Therefore, SLNs...

01 March 2021 3,703 3 View

Glass fiber content in a gypsum board ?

Any idea on how to get the volumic ratio of glass fiber in a gypsum board ? Thank you for your help !

01 March 2021 2,501 3 View

How to check the uv-vis absorption of nanoparticle by surface plasmon resonance?

I try to check the uv-vis absorption of Indium nanoparticle. Now I am measuring in solution, can I measure it in the form of a film?

01 March 2021 930 3 View

Distribution of particles in metal matrix?

How would define the "good" and "poor" distribution of particles within the matrix. Is there a quantitative solution to assess the distribution of the particles, which then having denotation of...

28 February 2021 7,397 8 View

Can anyone help me with the administration of the "Mind the Gap" Scale for satisfaction with transition to adult care?

We are working on a study focused on adolescents' transition to adult care and are looking for a validated measure for satisfaction with the transition. So far the only measure that we have came...

28 February 2021 2,338 1 View