The projectile is accelerated an have a high Temperature.
Does anyone knows any ralated paper or video?
in you tube there are videos of rolling a frame, where velocity comes as bc...the logic will be same..
I want to model fracture of a fuel tank made by AL7075 under pressure. So I need Plastic Properties,fracture initiation and damage evolution of AL7075 but I don't Know how find them.
04 May 2017 3,852 2 View
I am currently running an impact simulation of AL7075-T6 in Abaqus Explicit using the Johnson-Cook Plasticity option. I need to know the theory of johnson-cook modeling and melting and transition...
10 November 2016 665 0 View
I want to model the impact of a launcher to the projectile (like shooting a bullet from a gun) and get the stresses and deformation of the projectile. Is there any helpful website or article about it?
07 August 2016 4,029 2 View
There is difference between the ultimate strength of nanoparticles adhesive that is built from high Temp and low Temp ultrasonic process of resin.
05 June 2016 1,210 1 View
The Tg of the result adhesive is is about 35 C
05 June 2016 2,259 0 View
what this sentences exactly mean? (a) localised plastic shear-band yielding around the particles and (b) cavitation of the particles followed by plastic void growth of the epoxy polymer
02 March 2015 2,566 3 View
What kind of constraint should be apply to the edges?
02 March 2015 2,788 3 View
1) which of mechanical properties are affected? 2) How are they affected?
31 December 2014 4,326 6 View
Can anyone explain this method? Especially the last statement where it says only at 1.5 to 2.5mins was the MS/MS connected to the UPLC. How is that possible, is it a feature in this specific...
11 August 2024 8,141 3 View
I have input a moment load in module load Abaqus, i put my moment load on the node surface (using reference point). I have define moment in history output and make a set for moment too. But the...
08 August 2024 4,831 4 View
I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...
07 August 2024 1,028 0 View
Hello What should be done to separate and identify organic acids in HPC when their RetTime is the same?Like oxalic acid with Propanoic Acid.or acids that have a very close RetTime.
07 August 2024 8,782 3 View
I am planning to collect human fecal samples for metatranscriptomic analysis using MGI. These samples are from indigenous people living in a region with high temperatures. I will have access to a...
06 August 2024 1,367 3 View
During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...
06 August 2024 726 3 View
I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...
05 August 2024 454 3 View
A typical reforming section in a large-scale Haber-Bosch process (Figure 1) comprises two reactors. A mixture of methane (CH4) and steam (H2O) is fed into a primary reformer to produce syngas via...
01 August 2024 7,051 5 View
Hi everyone, I'd like to better separate two close peaks coming from a bioconversion sample, I'm currently using a C18 KromaPhase 4,6mm Ø.I. SCHARLAU, particle size (µm): 10, pore size (Å): 100,...
30 July 2024 435 3 View
Hello, colleagues. Recently, I have been working on a metal processing simulation with my UMAT in Abaqus. I have outlined the corresponding simulation, but I keep encountering issues that cause...
30 July 2024 7,062 1 View