I synthesis a powder ZnWO4 , then I'll sintere that for sceintillators applications . I don't know how i choice my sintering's condition?

More Sadegh Mojahedfar's questions See All

About transparent ceramics?

thank you 1. Why uniformity of grains is important to have transparent ceramics?and How is effect uniformity of grains on increasing transparency of ceramics?then What can we do for have final...

01 February 2017 7,318 0 View

Why we need to cubic structure to produce transparent ceramic? and Is cubic structure concern to grain shape or unit cell?

if that is related to grain shape Why in some source implied "a lot of transparent have cubic structure but in some articles produce transparent ceramic with monoclinic or hexagonal structure is...

31 December 2016 9,190 3 View

Hi, How can we compeletely define synthesis ?

tnx

10 November 2016 6,904 0 View

Hello , How many roues are there for chemical synthesis ?

thank u

10 November 2016 5,517 0 View

I will used solid state reaction (SSR) for synthesis ZnWO4 , is it important the particles starting soluble in solvant?

I'll synthesis ZnWO4 from the powders ZnO and WO3 by used of SSR, but seems that the particles ZnO and WO3 in Water and ethanol are insoluble. Thank you

09 October 2016 722 3 View

Is there valid sources for solubility material in solvants (especially water and ethanol) ?

I'm looking for values of solubility ZnO and WO3 in water and ethanol , How can help me ? thank you

09 October 2016 3,369 2 View

Is it any different between ceramic and polycrystal ?

tnx

09 October 2016 350 0 View

Who can introduce to me a software for calculate melting point a composition with some impurities ?

tank you

07 August 2016 9,626 1 View

Do we have any metallic scintillator ?

tnx

04 May 2016 5,419 0 View

Are there any different between soak time and dwell time in sintering processe ?

tnx

04 May 2016 6,542 0 View

How to understand this crystallographic phenomenon of low temperature crystals in zeolite?

During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...

06 August 2024 726 3 View

Why results of ROS flurescence are negative as there was no bacteria within?

Hello. I am working on ROS production of two systems: system A is cerium oxide and hydrogen peroxide, system B is cerium oxide nanoparticle, hydrogen peroxide and potassium bromide. I did some...

04 August 2024 5,974 3 View

Why aren't most metal oxides insoluble in water?

Why BaO (s) + H2O(l) ---> Ba 2+(aq) + 2 OH - (aq) if Oxygen loves owning all the electrons, why would it bind to hydrogen which competes with Oxygen for electron ownership more so than...

03 August 2024 5,392 1 View

Why chloride turns into chlorine gas in a Downs cell?

I imagine the battery drives the graphite into a carbocation, then chloride is oxidized to donate the electron to the carbocation, but what pushes the lost electrons of chloride to be shared...

03 August 2024 5,384 0 View

How to calculate the molar proportions of the oxides from the XRF analyses?

02 August 2024 2,565 2 View

Why Powder XRD is performed after cruhsing a crystal if Single Crystal XRD analysis of the same crystal has been performed already ?

What information we can get from PXRD analysis other than from SCXRD analysis of a crystal ?

30 July 2024 6,261 4 View

Simulation of metal drawing by Abaqus with UMAT?

Hello, colleagues. Recently, I have been working on a metal processing simulation with my UMAT in Abaqus. I have outlined the corresponding simulation, but I keep encountering issues that cause...

30 July 2024 7,062 1 View

What is the solubility of Iron (+3) in Bismuth Oxide?

Dear all: I am modifying Bismuth Tungstate with Hematite (Fe2O3), so I would like to know about how much Iron(+3) can form a solid solution in a Bismuth Oxide matrix. Best wishes Marco

29 July 2024 2,163 1 View

Addition of EDTA during the synthesis of copper nanoparticles to prevent it from being oxidized?

I've attempted to use this method to synthesize copper nanoparticles. Copper nanoparticles can be synthesised using a variety of precursor materials. CuSO4, distilled water, NaOH, and EDTA are...

28 July 2024 8,027 3 View

Standard curve of H2O2?

Hi, I need to prepare a standard curve of H2O2 to evaluate the primary products of oxidation. H2O2 I have is 35%. How do I prepare a stock of H2O2 10 microlitere. If s.o has experience, I would be...

26 July 2024 3,460 2 View

Ajeet Kumar

Dialatometry can be used to find the calcination and sintering temperature

Chao Yang

Firstly, DSC analysis can determine its temperatures of phase transformation; Then, according to its softing temperature and desired grain size and phase, you can select relative high sintering temperature.

Karunesh Tiwari

I hope this article will help you.

Synthesis and characterization of ZnWO4 ceramic powder

G. Bhaskar Kumar, K. Sivaiah, S. Buddhudu

Ceramics International

Volume 36, Issue 1, January 2010, Pages 199–202