I have worked with graphene nanocomposite and here the sample sulfer is used to reduced of graphene oxide (the papers). I have doubts about how its reduced and get good conducting nature?
PLEASE can any one answere me my question here?
02 March 2015 8,846 5 View
I have literature review of the article which there long discuss of the materials have functional group, have conductivity of the materials I must know.. whether the materials have conductivity is...
07 August 2014 5,708 3 View
I have doubts about graphene conductivity. Which has more high conductivity G, GO, or rGO?
03 April 2014 2,377 4 View
I have prepared the semiconducting material for solar cell applications, and I need to calculate the recombination rate and the lifetime of solar cells devices.
02 March 2014 9,097 4 View
The graphene oxide is a material to synthesis for the application of nanoelectronics, solar cell, energy materials.
01 February 2014 7,102 1 View
In some materials, properties such as band gap, thermal conductivity differ along different crystallographic axes. What are the basics?
01 March 2021 1,923 3 View
In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...
01 March 2021 2,207 3 View
Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.
28 February 2021 3,640 3 View
It is a general practice to introduce Ground Plane in FDSOI devices under the BoX. The Ground Planes are introduced by Ion Implantation through Top Si layer and Buried Oxide. I wanted to know that...
24 February 2021 5,974 4 View
I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...
23 February 2021 4,155 4 View
Does the absorption coefficient of the semiconductor changes with the change in the structure of the semiconductor? If you have a thin film and nanowire of the same semiconductor, will the...
23 February 2021 9,799 4 View
I notice that upon washing and air-drying of my RGO/SPCE surface and characterizing again via DPV, the current response towards ferricyanide probe significantly decreases. My worry is that the...
22 February 2021 5,324 3 View
I want to measure the thickness of aluminum oxide and titanium oxide layers deposited on textured glass substates. The layer thicknesses are typically below 100nm.
21 February 2021 5,465 4 View
I have used Picral etchant (4.2 g Picric acid, 10 mL Acetic acid, 70 mL Ethanol, 10 mL distilled water) but it didn't work. Is there any alternative?
21 February 2021 2,558 5 View
I have a direct band gap material and an indirect band gap material. If I made a composite of both through physical mixing. Then how can I determine the band gap of such a material as the Tauc...
17 February 2021 8,104 4 View