I have a DSC curve for the resol resin matrix attached with the file. The heating rate at DSC was about 10k/min.
How do I choose the Autoclave parameters for curing of Glass fibre resol composites.
Which thermogram curve should i used for the curing of the resol resin.
Could someone interpret the DSC and TGA curve of the resin and tell me how to choose the parameters.
Thank you
Hodhaifa Derdar . I asked something else, you were saying other. I want to know how to take the curing parameters for autoclave. Not the presence of impurities
Dear Linto George Thomas, you asked for interpret the curves and it's hard to interpret that is what i mean
Hodhaifa Derdar . It doesn't have any impurities. Its a mixture of resin and hardener. I require the PARAMETERS FOR fabrication of composites. what is the pressure and temperature should take for curing the resin in Autoclave based upon the above DSC analysis. It shows the decomposition of resin and hardener mixture.
- Badges
- Science topic
- Similar topics
- Physical Sciences
- Materials Science
- Materials Chemistry
- Polymer Chemistry