I'm new in microfluidics. I've started working with equipment of Elveflow, Nanoscribe and FemtoLAB.
With the equipment of Elveflow I'm developing microfluidic micro-channels using materials as PDMS and chemicals as Acetone, Isopropanol, SU-8 developer, SU-8 2025, 2050, 2075 (photoresistive resins).
With the eqipment of Nanoscribe I'm developing micro-structures using photosensitive resins and chemicals as Acetone and Isopropanol.
With the equipment of FemtoLab I'm developing micro-structures from different materials as metals, silicon wafers, glass, polymers. This is ablation or micro-milling of the mentioned above materials.
As protection of my health I'm using glooves, protected clothes and a mask with organic filters. Is there somebody here in researchgate who has experience how to protect totally in this area of research or it is not possible because of the very aggressive chemicals used in microfluidics?
I would appreciate any opinion on this matter because I am very worried about my health and I don't know how to best protect myself and whether there is even such a possibility. May be the best protection is to stop working in this area of research!
Thank you for your participation in this discussion!
Hi Tihomir You are indeed raising concerns that apply to any lab handling chemicals. First, safety protocols must be established with the lab regarding the storage of chemicals in secure and appropriate cabinets. For the use of volatile chemicals, we advise working under a chemical hood when necessary and wearing lab safety glasses in addition to the equipment you are already using.
Elveflow also offers training for microfabrication if you are interested in learning all the best practices. https://www.elveflow.com/microfluidic-products/microfluidics-services/microfluidic-training/
Hope this helps!
- Badges
- Science topic
- Similar topics
- Entomology
- Resistance