How to print silver ink on paper to be used as an electrodes ?

More Suresh S. Balpande's questions See All

Gerber file extraction in CST?

I have a feed alone as one of the layer. When i try to extract that, I get the folloing error. Kindly help me , how to resolve the issue and extract the gerber file

29 February 2024 3,772 2 View

Why do we see two zeta potential peaks even when the size distribution is monodispersed?

The emulsion of my sample has 0.08 polydispersity with an average size of 130 nm and only one peak (100 % intensity) both in DLS and MADLS. Nevertheless, I see two zeta potential populations....

20 February 2024 2,636 4 View

Can Bavistin be incorporated into microalgae media?

can Bavistin be incorporated into microalgae media against fusarium?

20 February 2024 3,488 0 View

How to retrive the green pigment in bleached microalgae in chu 10 plate containing antimycotic solution?

under the addition of antifungal, the microalgae did not have significant green pigment in the petriplate and cells looked bleached in petriplate. on microscopic analysis few cells were found to...

20 February 2024 6,788 0 View

Does the total mass contain both matter and antimatter masses?

If the total mass is interdependent, then does the total mass contain both matter and antimatter masses like this: Mass = Matter × Antimatter. E.g. (hypothetical), The Proton's mass ==...

17 January 2024 9,945 3 View

What is an appropriate Panel data estimation method if t=20 and i=20?

In panel data estimation if t=20 and i=20, do we necessarily need to test for stationarity, co-integration and causality. What is best method to estimate the model with this data set, if one is...

30 November 2023 6,086 0 View

Can I have a case on a social entrepreneur based in Mumbai authored by my co-author and I reviewed on ResearchGate?with my co-author?

I pioneered the courses on Start Your Business and Grow Your Business in India as Chairperson, Center for Entrepreneurship, SPJIMR, Mumbai. My colleague at SPJIMR , Dr. Nirja Mattoo set up the...

30 October 2023 5,805 2 View

What are the methods for analyzing trihalomethanes in water other than gas chromatography and liquid chromatography?

for monitoring disinfection byproducts in drinking water

12 October 2023 8,613 3 View

What are some common methods for quantifying the concentration of silver on a membrane surface before leaching test?

We can use EDX to measure the silver concentration before and after leaching test to know amount of silver leached. However, the concentration of leached silver from membrane is measured using...

09 September 2023 8,339 1 View

What are the recent studies in earthern structures and construction?

Suitability of Soil Sustainable alternative to Stabilizer and soil Pre and post construction issues and difficulties Durability of recent earthen construction

04 September 2023 9,749 0 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

Hello researchers Is this a random laser or just fluorescence?

I am using Rhodamine6G as gain medium and silver nanoparticles as scatterers on a microscope slide and laser input 532 nm comes from above.

09 August 2024 9,894 2 View

Binder for ZnO nanoparticles in graphite paste electrode?

I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?

03 August 2024 4,624 3 View

About impact factor?

I have been publishing the Nepalese Journal of Agricultural Sciences (online ISSN 2091-0428; print ISSN 2091-042X) on www.nepjas.com and research gate. I was wondering how I can get an impact...

01 August 2024 1,277 1 View

How to find a reaction is reversible or irreversible in CV? How to know the number of electrons transfer?

My screen printed electrode CV is given here. For Nerstean one electron reaction the delta E value should be close to 57 mV and ration of Ic/Ia should be close to 1. I did CV of my screen printed...

30 July 2024 4,671 3 View

How to check pH of a high strength hydrogel?

We are working on biopolymeric hydrogels. Our system is highly viscous and sticky, and the gel formed are high in strength. We are unable to use pH electrode and pH strip. Please suggest an easy...

30 July 2024 942 2 View

While doing Chronoamperometry, when the light is turned off, why the current is not decreasing sharply?

Here, I have used Ag/AgCl as reference electrode and 0.5M KOH.

29 July 2024 4,538 3 View

Why semicircle of nyquist plot is not complete?

While I am doing HER, I noticed that nyquist plots of Electrochemical Impedance Spectroscopy (EIS) is not complete. Will it affect for the Linear Sweep Voltametry (LSV) data? However, I can found...

26 July 2024 7,542 4 View

Why do these abnormal charge/discharge curves of coin cell batteries appear?

As shown in the figures, there are several abnormal charge/discharge curves.Each of them may have different problems. I am curious why these situations appeared differently?There are a lot of...

24 July 2024 6,930 1 View

What binder would be the best choice to modify glassy carbon electrode with a 2D Material like Graphene or MXene?

I am trying to drop cast 2D Materials on Glassy Carbon Electrode for Cyclic voltametry and EIS purpose. What would be best binders to use?

23 July 2024 5,776 2 View

Naima Ghemmit-Doulache

I would like to know the nature of the paper on which you print Ag electrodes.

salutations.

Aqsa Nazir

Dear Suresh S. Balpande

Please read attached papers you will get an idea of printing Ag on the paper to be used as electrodes

Rémi Rafael

If you are looking for a very economic DIY option you should probably look at that:

Conference Paper Instant Inkjet Circuits: Lab-Based Inkjet Printing To Suppor...

This paper explains how to convert a classic office inkjet printer to print silver inks on paper and make paper baser PCB.