How to prepare tuneable porosity for increasing electrocatalytical properties in catalyst ?

29 August 2022 0 2K Report

The catalyst that has more porosity will be more active than that has lower porosity because it has more surface area to form the actives sites and this usually leads to greater activities.

Badges
Science topic

More Md. Shamim Hasan's questions See All

Can we mark 'EFL Learners shifting from general digital to AI technologies' as technological transition?

After COVID-19 it has seen that EFL learners technological affiliation has raised. In addition, in the post-COVID period learners started to engage AI technologies like ChatGPT while learning...

08 August 2024 8,964 4 View

How to convert g/kg Humic acid dose to kg/ha?

I used humic acid at 0.044 g/kg soil in my pot experiment. But finally, I have to recommend kg/ha. Each pot's soil weight was 11 kg. What is the solution?

02 August 2024 7,186 6 View

Bangladesh government's reported plan to use lethal force against protesters? We need help Urgently ?

Please Help Us Urgently

01 August 2024 711 1 View

"How has Leader Sheikh Hasina's government allegedly responded to student protests, including the reported killing of over 500 students ?

"How has Leader Sheikh Hasina's government allegedly responded to student protests, including the reported killing of over 500 students, as well as arrests, custody, remand, and the involvement of...

29 July 2024 2,181 7 View

Can a photocatalytic degradation of methylene blue from red mud be pseudo- zero order kinetics?

My photocatalyst from solid waste red med. Dye is methylene blue My all parameter study is showing zero order. How to prove it further that the reaction in zero order?

29 July 2024 7,404 1 View

How to calculate pseudo order kinetics?

I know the rate law. But for my photo-catalytic experiments, first 90min is adsorption (dark) and next 150min is under UV light (total 240min). How to remove the adsorption part for calculation?...

21 July 2024 8,807 6 View

How can I calculate spin texture using Quantum Espresso for non-colinear case ?

I want to calculate the spin texture for the electronic band structure obtained from SOC calculation. Is there any way for calculation of spin texture using quantum espresso??

19 July 2024 8,571 1 View

How is surfactant addition calculated?

I want to make 100 ml of MWCNT/distilled water mixture at a volume fraction of % 0.1. MWCNT density is 2100 kg/m3. I will add gum arabic as surfactant. If I add surfactant at a 1:1 ratio, will the...

19 July 2024 8,494 0 View

What is the average energy consumption per gate operation with superconducting qubit?

Could you provide information on the average energy consumption per gate operation when using superconducting qubits, specifically focusing on the microwave power required to implement gates? I...

15 July 2024 954 0 View

What is the Scopus and Beall's dilemma?

I've found that some journals are both Scopus-indexed and listed on Beall's list as predatory or potentially predatory. Why does this discrepancy occur? Are there any more reliable platforms than...

12 July 2024 5,158 1 View

Need heterogeneous catalysts calcined before reduction?

Metal-containing heterogeneous catalysts often need to be calcined before reduction, so what are some examples of catalysts that perform better without calcination? What is the reason and how many...

05 August 2024 909 2 View

I have calcined my catalysts without flowing air from the compressed air cylinder will there be any problem with my reaction if i use that catalysts?

FYI Catalyst is MFI zeolite Si/Al = 140,25.40.11.5,15 I am using this catalyst to study methanol to DME conversion

25 July 2024 2,486 2 View

Alternative binders other than Nafion solution?

Hi Everyone, I plan to deposit a catalyst (TS-1@Co-PDA, in the core: TS-1 zeolite with a shell of Polydopamine designed with Cobalt) on a rotating ring-disk electrode (RRDE) to evaluate the...

29 June 2024 8,203 3 View

Why reaction order is changing with temperature? Is it a non elementary reaction?

I am performing catalytic metal supported benzyl alcohol reaction kinetics in presence of potassium carbonate base. Every time order change observed at lower catalyst conc. It showing zero order...

20 June 2024 7,100 2 View

How to perform the DFT calculation on the mechanism of Photocatalytic CO2 reduction with water?

Dear Researchers, I hope this email finds you well. I am currently working on research involving DFT calculations to study the mechanism of CO2 reduction using a catalyst with water as the...

14 June 2024 4,612 4 View

What are the approximate quantities of Ni/Al₂O₃ and Cu/ZnO/Al₂O₃ catalysts required to produce 2095 tons of methanol per day?

A methanol production process combines tri-reforming of methane (TRM) with water electrolysis to utilize CO₂. The TRM reactor uses a Ni/Al₂O₃ catalyst, and the methanol synthesis reactor uses a...

10 June 2024 2,105 1 View

Do gases emerge from catalytic oxidation in the presence of zeolite as a catalyst, and what are the gases, if any?

30 May 2024 7,061 1 View

Why I should use UDF for modelling hetrogeneous Reaction ?

Hi Everyone, I am using a UDF file that contains coke oxidation of spent catalyst. I was wondering if there is any way to use the built in Function in Ansys instead. Furthermore, coke oxidation...

23 May 2024 4,240 0 View

Can Metal-Organic Frameworks (MOFs) use as a primer on metallic monoliths?

FeCrAlloy® foils are commonly used for fabricating metallic monoliths. However, their lack of specific surface area/roughness (pores) hinders catalyst adhesion during the coating process. Several...

22 May 2024 8,462 1 View

Can water be split into hydrogen and oxygen using any catalyst without using electricity?

Is it possible to brake H2O into H2 and O2 using hetrogeneous catalyst without using electricity. i am looking for responces with referance.

09 May 2024 8,180 1 View