Do gases emerge from catalytic oxidation in the presence of zeolite as a catalyst, and what are the gases, if any?

نجم الهندسة الكيماوية @njm-alhndst-alkymawyt

31 May 2024 1 7K Report

Yuri Mirgorod

نجم الهندسة الكيماوية

You did not write that you are going to oxidize in the presence of zeolites.

Does the pressure(-600 mmHg) affects pH?

When I conducted the degassing experiment using decompression under anaerobic condition(and I used ferrous based chelating agent), the oxidized ferric were observerd. So, could you tell me the...

03 March 2021 4,892 5 View

How to polymerize TEOS?

I want to polymerize TEOS on a surface. I know that NH4OH is a preferred catalyst and an alcoholic solvent should be used .But I can not find certain amounts of each material to use. Does any one...

02 March 2021 1,404 6 View

How to quantify carbon deposition on CuZnAl catalyst?

Dear All, I want to quantify carbon deposition on the surface of the CuZnAl catalyst. I have tried thermogravimetric analysis, but I've got weight gain as the active Cu- get oxidised. Does anyone...

01 March 2021 1,907 3 View

Modeling viscosity using model of Chung?

Hello, As part of simulation of gases mixture and water, I need to calculate viscosity of the fluid components and I am using relationships proposed by Chung et al. (1988). The irony is while I...

25 February 2021 8,053 5 View

Thermal reduction of graphene oxide.?

I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...

23 February 2021 4,155 4 View

Color of spiro-ometad film?

What does the color of a spiro-ometad film indicate? I got purple, green, red, even black color of the spiro film. Is there anything we can get from the preliminary color analysis(e.g. oxidation...

21 February 2021 1,831 4 View

Which compound is getting oxidized during bulk electrolysis with TFAA?

The experiment is really simple. When I do a bulk electrolysis with 1% TFAA (ACN solution) to get dihydrogen, what is going to be oxidized? (working electrode graphit, counter electrode platinum,...

18 February 2021 4,430 1 View

ZnS oxidizes to ZnO!!why??

when I put my ZnS solution in the chemical bath, the ZnS oxidizes so there are ZnO peaks appearing because of the reaction with the oxygen in the air, despite the fact that I close the beaker...

14 February 2021 5,778 9 View

How to do the calculation for super oxide dimutase assay and how to calculate the R squared value in regression equation for catalase assay?

i have the enzymatic antioxidant assay by following the method of Misra and Fridovich, 1972 for super oxide dimutase and Luck, 1974 for catalase assay can any help me how to the calculation for...

11 February 2021 2,241 3 View

How can I add the metal oxide NP's to the cell lines? I have to make some drug and NP conjuhgates. How much concentration to use? Need some help?

Hi everyone. I am working on metal oxides. I need to make some conjugates of drugs and NP. But I am unsure of what concentrations to make. I have read some articles, but they haven't mentioned...

10 February 2021 3,372 2 View