How to perform coupled field analysis in abaqus software?

More Chaitra Deshmukh's questions See All

Which one is better for storing energy: Fuels synthesized from CO2 or Hydrogen?

Based on educated guesses, which one of the following promises a better future for storing energy for grid scale, automobiles etc as opposed to batteries: 1) Fuels synthesized form CO2 2)...

02 February 2021 8,741 6 View

How much Ti and B (in ppm) is required for effective grain refinement and why?

To have the desired grain size in 6061 and 6063 Al alloy, what should be the minimum % of Ti and B pick up and what is the chemistry/metallurgy behind that?

07 January 2021 9,305 2 View

How to make AlV50% alloy by thermit route?

Kindly provide the technical papers/patents on the production of AlV50% alloy by thermit route, by using V2O5

05 January 2021 2,471 3 View

Apart from deoxidation what are the other applications of Ferro Aluminum (FeAl) and Al wire?

FeAl and Al wire has applications in Steel for deoxidation. I want to know the other application of various grades of FeAl. Does Al wire also has other applications apart from deoxidation? Regards

27 December 2020 8,435 1 View

Is there is any reference if someone is using Ti sponge cored wire instead of FeTi 70% cored wire for plain carbon steel?

There is a different behavior in carbon steel and stainless steel. Drastic low recovery in carbon steel due to high melting temp. But in ss , working temp is high so dissolve at 1668 degree temp....

16 December 2020 8,765 8 View

Is it possible to have grains in the range of 50-80 micron (2-5 min of contact time) in 6061 and 6063 alloy after the addition of TiBAl (5:1)?

If 0.2% of TiBAl (5:1) is added in 6061 and 6063 aluminum alloy what is the grain size for 2-5 min of contact time?

20 September 2020 4,265 3 View

Something is wrong with my Raman spectra of TiO2, Carbon dot and CD TiO2 composite. What can be the reason?

I have already taken XRD and FTIR for these samples which are fine. Pls check attachment.

20 September 2020 7,351 7 View

How to categories the Fe powder application based on various users?

Does the grades of Fe powder used for tablet/briquette varies according to the stirring process, mechanical stirring, manual stirring or electromagnetic stirring? Does the grades of Fe powder...

04 September 2020 3,885 2 View

Which instrument is used for measuring light reflectance value ?

To measure the whiteness of any material, light reflectance instrument is used which is called as LR value. From where I can get this instrument? Please suggest.

30 August 2020 6,266 7 View

How to make AlNb50-60% by melting route?

kindly guide how to make AlNb50-60% alloy by melting route i.e., Nb2O5 and molten Aluminum and please provide the supporting literature/patent/technical papers

08 August 2020 3,982 5 View

What techniques can I use to determine the miscibility of polymer blends?

The term miscibility refers to the single-phase state in thermodynamics. I do not mean the compatibility of different components. To determine the miscibility I know several techniques such as...

03 March 2021 4,107 4 View

How to define and get results (stresses) for certain points of a model in abaqus, using python? When the size of the model changes?

I want to do a parameter study of a aixsymmetric cylinder in Abaqus. I want to create several jobs where I get the stresses for 3 different points in my model. These points are defined. I wrote a...

01 March 2021 10,078 1 View

Shall I skip the measurement model in SmartPLS?

Hello everyone, I had run a mediation model in SmartPLS using questionnaires that were already validated among my statistical population. A professor who edited my paper -though she is not...

01 March 2021 3,052 3 View

What is involved in morphological changes of SEM images of a substance?

In the sem analysis of CaCO3 nanaoparticles, the morphology images showed spherical shaped particles but the proposed morphology for these type of nanoparticles is trigonal. I prepared the...

01 March 2021 1,960 4 View

I have designed reflectarray element and feeding it though Horn Antenna on HFSS. After full wave simulation, I am not getting desired results?

I have designed reflectarray element to generate OAM beams at 5.8GHz and feeding it though Horn Antenna on HFSS. After full wave simulation, i am not getting desired results i.e Radiation pattern...

01 March 2021 9,701 5 View

Joint behaviour in Abaqus is not captured well?

I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...

01 March 2021 6,661 3 View

Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS?

I need to model masonry and reinforced concrete minarets for my MSc thesis. Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS? (Or any other program for just...

01 March 2021 736 3 View

How to assign different material properties to each element in Abaqus ?

Hello, I am writing a python script to generate my model and write the input file. The problem is I have 1000 elements in my mesh and I want to assign different material properties to each...

01 March 2021 9,511 3 View

How to define tie constraint between rigid body and another part in dynamic explicit model of Abaqus?

Hi dear researchers I connected a rigid body into the part of my structure by tie constraint and then I added displacement to rigid body, in static general step every thing is fine and these two...

28 February 2021 3,442 2 View

Microstrip antenna design tutorial of HFSS 3D layout module ?

I have designed a 24 GHz rectangular antenna on HFSS 3D model and got desired results while desing the same antenna with same dimensions I am getting resonance frequency at 27 GHz I am...

28 February 2021 4,426 2 View

S M Anas

Dear Chaitra,

I suggest you try the following links:

https://info.simuleon.com/blog/fully-coupled-thermal-structural-analysis-with-abaqus

https://www.google.com/url?sa=t&source=web&rct=j&url=https://abaqus-docs.mit.edu/2017/English/SIMACAEANLRefMap/simaanl-c-couptempdisp.htm&ved=2ahUKEwi0_MeL7vPtAhX863MBHRU0CekQFjABegQIBxAC&usg=AOvVaw1CsrMO1kdAv5mk236Mi6AS&cshid=1609268029541

Best regards,

Chaitra Deshmukh

thanks for information S M Anas , second link will be helpfull for me