Dear all, I found a problem during the fabrication of the electrode. After synthesis the active materials of PANi/GO dried composite, to coat onto current collector, I found that my materials are still in a lump and hard to homogenise on the current collector after adding on some binder in it.
Even though I tried to crush it by ball mill method, the materials still hard to be in powder form.
Really need any advice from all of you in this matter.
Thank you
I suggest you to have a look at the following papers:
-Reduced Graphene Oxide/Fe3O4/Polyaniline Nanostructures asElectrode Materials for an All-Solid-State Hybrid Supercapacitor
Sanjoy Mondal, Utpal Rana, and Sudip Malik
J.Phys.Chem.C, 121, 7573−7583 (2017)
Available at:
https://tinyurl.com/y26ocvgl
-Polyaniline–Graphene Oxide based ordered nanocomposite electrodes for high-performance supercapacitor applications
Manoj, M., Anilkumar, K.M., Jinisha, B. & Jayalekshmi S.
J Mater Sci: Mater Electron 28, 14323–14330 (2017)
Available on RG at: https://www.researchgate.net/publication/317548215_Polyaniline-Graphene_Oxide_based_ordered_nanocomposite_electrodes_for_high-performance_supercapacitor_applications
Good luck and best regards, Pierluigi Traverso
Dear all, why not direct in situ deposition? The following links present additional information. My Regards
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6540261/
https://doi.org/10.3390/nano10010118
https://doi.org/10.1021/ie301734f
https://www.omicsonline.org/open-access/functionalizedgraphenepolyaniline-nanocomposites-as-proficientenergy-storage-material-an-overview-.php?aid=82559
https://doi.org/10.1177/0954008319845435
- Badges
- Science topic
- Similar topics
- Engineering
- Materials Engineering
- Powders