I need to know how can I provide input parameter of ABAQUS for modeling viscoelastic behaviour of soils. Is there any laboratory test for this matter?
Dear Abhishek,
Thank you for the useful link.
Regards,
Ebrahim Sangsefidi
I compacted unbound aggregates at optimum moisture content and then let it dry in the oven for one day. The repeated load triaxial test was carried out on this sample in which I faced a weird...
07 August 2019 3,505 9 View
Given the presented scatter-plot, it is looking like that there is a relationship between X and Y in my data. Unfortunately, the simple nonlinear curves can not describe this relationship....
01 February 2019 7,393 32 View
I have a function as follows: y= a*x^b a=7e-5 b=-0.755 I attached a simple graph of the function. As it is apparent from the graph the CURVATURE of the function increases from ZERO to a finite...
01 February 2019 8,015 8 View
I have andesite source of road aggregates. I did XRD test on bulk powder and oriented samples ((1) air dried, (2) treated with ethylene glycol at 60oC, and (3) heat-treated at 550 oC for 45...
11 December 2018 6,410 3 View
I mean after doing the compaction practice in various water contents and determining the dry density corresponding to each water content, what would be the equation of the resultant compaction...
10 November 2018 7,395 11 View
I conducted CBR tests on unbounded aggregates. As you can see the CBR test results in the attachment, the curves concave up and there is a relatively enormous shift between two test results....
10 November 2018 1,610 7 View
I have a sort of data in which the change in the weight of materials is recorded during the time. Unfortunately because of special condition I cannot record the weight in the first 75 seconds. -...
09 October 2018 2,681 13 View
A solution in MATLAB Software is preferred.
09 October 2018 8,118 5 View
Could you please find the attached image and let me know if the presented data can show any weathering in the glass. Based on my understanding, the glass in the structure of my materials remained...
09 October 2018 8,163 1 View
SPSS software is preferable :)
08 September 2018 2,286 5 View
I have input a moment load in module load Abaqus, i put my moment load on the node surface (using reference point). I have define moment in history output and make a set for moment too. But the...
08 August 2024 4,831 4 View
I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...
07 August 2024 1,028 0 View
I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...
05 August 2024 454 3 View
Hello, colleagues. Recently, I have been working on a metal processing simulation with my UMAT in Abaqus. I have outlined the corresponding simulation, but I keep encountering issues that cause...
30 July 2024 7,062 1 View
I am trying to run a restart analysis, which imports deformed configurations of parts from a generated ODB file. It runs fine in Windows OS but when I try to run it in Linux OS, it is giving some...
29 July 2024 9,572 3 View
Sure, here is the translation: I have a 3D orthogonal woven composite structure where warp, weft, and binder yarns are oriented in three directions. After modeling these yarns and the matrix in...
28 July 2024 8,169 0 View
hi, I am doing a risk analysis of a cylindrical fuselage with windows. I have applied contact interactions between the different parts, and I have applied a unit value load to a reference point,...
20 July 2024 647 2 View
Hi all, I am using the element deletion process based on a Tsai-Wu criterion through a UMAT with a specific State Value controlling the process (DepVar -> Variable number controlling element...
17 July 2024 1,501 1 View
I saw a paper(PHAN V-T, ZHANG X, LI Y, et al. Microscale modeling of creep deformation and rupture in Nickel-based superalloy IN 617 at high temperature [J]. Mechanics of Materials, 2017, 114:...
16 July 2024 8,436 0 View
Hello I am trying to simulate repulsive force of two permanent magnets in Abaqus. I have implemented Force equations into a vdload subroutine. sensitive parameters are the center to center...
15 July 2024 3,491 0 View