How to do buckling analysis in ansys apdl for laminated plate with PZT 5H attached?

I am doing buckling analysis of laminated plate surface bounded with two piezoelectric PZT 5H and axial compressive load is applied. I am getting an error, No ANEL table exists for material 2....

16 February 2021 510 1 View

Which furnace or method are suitable for direct melting of the powder ?

My question is very specific about melting of pure reduced Iron Fe in powder form

29 December 2020 4,352 3 View

I have one question related to cross correlation and auto correlation in neural network training?

Autocorrelation value is 0.3 and input cross-correlation error value is 3.Are the obtained results after training ANN is correct or wrong?

04 October 2020 9,686 2 View

Poly ICLC or Poly IC structure for docking ?

I want to do docking of Poly ICLC with protein. But, unfortunately there is no crystal structure for Poly ICLC or poly IC. Poly ICLC is a complex of Poly IC, poly lysine, and...

24 September 2020 6,107 1 View

What is the best way to preserve fungal RNA in shipping (1 - 2 days)?

The sample (fungal RNA) extracted with RNeasy Kit is supposed to be sent for sequencing.

15 September 2020 7,128 3 View

How to measure the T1 and T2 value from a MR image ?

I have an MR Dicom file having values of repetition time, echo time, Inversion time, flip angle, etc. I want to calculate T1 and T2 from this Dicom file. Is there any way to calculate this from...

12 March 2020 7,598 12 View

I want to simulate the rcc frame in a software, can anyone please suggest me the best option for research work?

Wanted to compare the behaviour between ductile and non ductile detailed RCC frame specimen

04 February 2020 270 2 View

How to calculate LOD & LOQ in the validation of analytical method using HPLC?

I have injected 5 samples of lowest possible concentrations. I have taken the std deviation of area and slope of the equation obtained for the regression line of calibration to calculate LOD &...

19 January 2020 4,730 7 View

How to know the depth of Xylem in live plants and trees? Is there any tool in market?

Hi, I am looking for a tool to measure the start and end of xylem tissue in plant and tree. Please send the link if such product (s) are available commercially. Thank you

18 January 2020 8,808 0 View

How do I get a charge discharge curve in a potential window similar to that of potential window of CV in Autolab workstation with nova software 2.1.4?

03 January 2020 1,399 2 View

1 nm thick MgO thin-film to be deposited on Si wafer using thermal evaporation. What will be the optimum deposition conditions?

Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.

28 February 2021 3,640 3 View

How to prepare a thin polymer film by post-polymerization/crosslinking?

24 February 2021 2,362 5 View

Is is possible to pole with corona poling pellets of the sample material instead of thin films?

As it is highly probable that pellets will have a higher degree of air gaps and voids than thin films, is it possible to pole the samples with corona poling nevertheless? Or is there the...

24 February 2021 1,349 1 View

How to troubleshoot Electrochromic Films and Electrochromic Devices?

I am trying to characterize an electrochromic system. The system uses ITO electrodes on glass, WO3 as the electrochromic film, and NiO as the ion storage layer. When I deposit NiO and WO3 and...

23 February 2021 9,592 2 View

How to improve the adhesion between germanium and silicon monoxide thin film layers using EBEAM evaporation?

I want to deposit multilayer coating of germanium and silicon monoxide on silicon wafer using ebeam evaporation?

21 February 2021 2,141 3 View

How can I measure the thickness of thin layers deposited on textured glass susbtrates?

I want to measure the thickness of aluminum oxide and titanium oxide layers deposited on textured glass substates. The layer thicknesses are typically below 100nm.

21 February 2021 5,465 4 View

How do I calculate absorption coefficient of my thin film if I dont know the thickness? Or how can I calculate the thickness of my sample?

I have done Uv-vis characterisation of my thin film and have received absorbance and transmittance data. Now I want to calculate the absorption coefficient but I dont know the thickness of my...

21 February 2021 7,148 8 View

How to construct different filler shape in MD simulations?

Is there any way to construct different initial filler shapes like triangle, square, rectangle, pillar, and tube in any simulation software.

20 February 2021 1,750 1 View

Can fractal dimension of thin film surfaces affects the electrons energy states?

As fractal dimension of a thin film surface implies the irregularity in the surface. Is it possible that the energy states of the electrons are also affected by the fractal dimension?

19 February 2021 5,509 3 View

What is the reason film thickness increased?

what is the reason film thickness increased when increased doping concentrations give some reasons The measured film thickness is 156, 282, 394, 548 and 681 nm for 0, 1.5, 2.5, 3.5, and 4.5 wt....

17 February 2021 8,987 5 View