during rock drilling in laboratory . can we predict the temperature of the bore hole means hole wall surface and hole bottom surface by placing the sensor and what is the major application to measure in research.
As I have conducted los Angeles abrasion test in the laboratory. Three type s of sandstone of varying UCS of Medium grained SS 13 MPa, fune grained SS 17.5 MPa and fine grained SS (pink) 51 MPa....
02 March 2019 7,384 5 View
As I have 500 data set in my work. I have split the data in to 60% for training and 40% for testing the data set in ANN. Is it ok to run the data set in NN. Pls give reason behind this so it help...
31 December 2018 7,109 1 View
If we have measured bit rock interface temperature using thermocouple during drilling. By embedded the thermocouple in the rock sample. Then what is the major application for industry,...
07 August 2018 9,756 11 View
for fine-grained sandstone the wear rate is 10 mg/sec (temperature produce during drilling is around 128 dec. centigrade) and Medium-grained sandstone the wear rate is 6.66 mg/sec (temperature...
04 May 2018 6,416 0 View
if the diameter of the drill bit increases with the same spindle speed, wear rate will increase or decrease. give reasons.
03 April 2018 3,666 4 View
As I am doing my research work on rock drilling. In this area, research paper related to operational parameters are very less. Can I cite the material drilling process parameters. Because area and...
03 April 2018 380 3 View
drill bit diameter increases from smaller to bigger during drilling operation, mean while we have calculated the Specific energy. but when the drill bit diameter increases, specific energy...
02 March 2018 3,484 6 View
As the drill bit diameter increases, thrust also increasing. What is major reason behind this. Why it is increasing and even for depth of drill also.
31 December 2017 7,993 4 View
During continues drilling operation, temperature goes on increases with decreasing in specific energy, what the main reason. What is the technical reason behind this.
11 December 2017 1,288 3 View
what is the major application (In Mining industry) of Experimental investigation to be carried out for rock core sample to measure the temperature during drilling operation. please give the the...
31 December 2016 4,626 0 View
I want to know more about Uranium ore deposits in world.
11 August 2024 6,720 0 View
My name is Apurva Saoji. I am a Ph.D scholar in Computer engineering in India. I am looking for international expert in reviewing my PhD thesis, "Competitive Optimization Techniques to Minimize...
07 August 2024 4,600 2 View
Do experiments on behalf of Our Business: Laboratory animal rearing Animal modeling Experimental animal behavior detection, image ultrasonic detection, electrophysiology platform Organoid...
05 August 2024 5,829 1 View
Thanks
03 August 2024 3,567 2 View
I want to know more about diamond ore deposits in Iran.
02 August 2024 7,399 0 View
I am in search of a modified Hummer's method, which can be used to synthesis graphene oxide within 6-8 hours. As I am a student it is not allowed for us to work after 5 in the laboratory. So I am...
01 August 2024 8,368 2 View
need of sensor details or sensor development for this question.
28 July 2024 4,539 3 View
Accredited laboratory of JV "Uz-Kor Gas Chemical" LLC (Uzbekistan) is looking for providers to conduct interlaboratory comparison tests on gas chromatographic analysis of hydrocarbons (component...
25 July 2024 8,108 0 View
I understand a glycerol stock for long-term preservation would be ideal, but how are working cultures generally stored? Mainly concerning Candida spp. isolates. A few references mention that they...
22 July 2024 6,592 3 View
I want to know more about Cu deposits.
18 July 2024 8,834 0 View