Biosensors design in Comsol tool
I’m trying to reproduce the acousto-optic coupling simulation in the paper Frequency–angular resolving LiDAR using chip-scale acousto-optic beam steering. LNOI(lithium niobate on insulator) is...
13 August 2024 9,795 0 View
Hello everyone, I'm encountering an issue with my electrochemical impedance spectroscopy (EIS) measurements and would appreciate some insights. Experimental Setup: Electrodes: Gold interdigitated...
05 August 2024 3,783 2 View
Hi there, I'm new to modelling with comsol. I would like to ask if it is possible for comsol to output linearly polarized (LP) modes? I tried modelling a simple single mode fiber with an enlarged...
23 July 2024 4,019 3 View
Undefined variable. - Variable: comp1.cNa - Géométrie: geom1 - Domaine: 1 Failed to evaluate expression. - Expression: comp1.cNa - Affichage: Graphique sur ligne 1
19 July 2024 1,938 2 View
Hi, everyone This figure depicts a simulation of an electrostatic energy harvesting system in COMSOL Multiphysics software. My question is regarding the relationship between the changes in...
19 July 2024 4,694 4 View
I work with planar interdigitated electrodes (IDEs). The finger width and the spacing between the fingers are 5 micron. The surface of the IDEs is coated by a non-conductive polymer layer...
16 July 2024 5,031 1 View
Hello, My name is Radu Jubleanu, I am a PhD student at the Politehnica University of Bucharest. I work in the field of magnetic storage in superconductors. I want to carry out a numerical study of...
15 July 2024 6,025 1 View
Dear All, I am trying to define the dispersion curves of a periodic unit cell in COMSOL Multiphysics with prescribed displacements. I am using two separate studies: - Study 1: Stationary, with...
13 July 2024 7,855 1 View
In this model clearly understanding how to active one layer to another layer and how to add powder material properties step by step.
08 July 2024 6,147 0 View
Hi, I am doing aptamer based electrochemical biosensor. First, I cleaned screen printed gold electrode using 0.5M H2SO4. Then, immobilized aptamer followed by blocking using 2mM MCH. I use...
06 July 2024 9,852 1 View
