Can anyone help me out in understanding optimization MATLAB programs used in MPPT techniques ?

Actully i am trying to implement optimization techniques in PV systems, I have gone through many videos, research papers to understand it but MATLAB tool implementation with programming is not...

23 December 2020 1,147 1 View

Pancreatin Analysis on Size exclusion chromatography?

Is there any possibility to analyse Pancreatin enzyme on HPLC without any treatment? Size exclusion UV chromatography seperate the 11 peak in Pancreatin enzyme. My concern is Lipase, amylase and...

24 December 2019 9,812 3 View

Which heat transfer method is most efficient ? And how (mathematically) ?

for more clarity.

07 July 2019 985 9 View

Identifying PGE by SEM and XRD. Will it be possible to get more or less same results by the Fire Assay method?

Getting result of SEM and XRD with full positivity in PGE concentration in a gabbro-anorthositic layered complex but not getting full support when analyzed by fire assay method.

14 February 2019 423 3 View

Why the particle size decreases when the concentration of surfactant increases??

While the size the nanoparticles is decreased to some extent on increasing the concentration of the surfactant means, what is the nature of / the role of surfactant on the nanoparticles? Also what...

09 December 2017 2,419 3 View

Regarding extending simulations with change in .mdp file in GROMACS

20 May 2017 7,422 2 View

Can we use a media more than once for a microbiological testing?

15 April 2017 6,307 5 View

Is it possible to do statistical data analysis by Mahalonobis method?

My data comprises of bulk geochemical i.e.,major, trace and REE parameters of granitoids. Mineralogical and norm calculation do not show much variation of data. However, I can correlate data...

13 June 2016 8,414 2 View

Capacity factor role in chromatography?

With regard, i want to know that what is the basic behind the capacity factor. what is the role of capacity factor in analysis? as we can say migration rate of analyte on column about this, but...

03 May 2016 5,929 12 View

How can i recover the metal deposited on electrode surface? and which is the best method for recovery of metal from electrode surface?

In both the cases, Electrode is polymer and graphite composite.or may be an inert electrode.

10 January 2016 3,777 3 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

What is the characteristic length to determine the Reynolds number for the scattered turbulent fluid flow?

Dear all, I just saw this example in FB on the difference between laminar flow and turbulent flow. The flow from a pipe hits the sink and scattered. The flow from the pipe is characterized as...

02 March 2021 1,999 5 View

How to define and get results (stresses) for certain points of a model in abaqus, using python? When the size of the model changes?

I want to do a parameter study of a aixsymmetric cylinder in Abaqus. I want to create several jobs where I get the stresses for 3 different points in my model. These points are defined. I wrote a...

01 March 2021 10,078 1 View

Joint behaviour in Abaqus is not captured well?

I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...

01 March 2021 6,661 3 View

Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS?

I need to model masonry and reinforced concrete minarets for my MSc thesis. Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS? (Or any other program for just...

01 March 2021 736 3 View

How to assign different material properties to each element in Abaqus ?

Hello, I am writing a python script to generate my model and write the input file. The problem is I have 1000 elements in my mesh and I want to assign different material properties to each...

01 March 2021 9,511 3 View

How to define tie constraint between rigid body and another part in dynamic explicit model of Abaqus?

Hi dear researchers I connected a rigid body into the part of my structure by tie constraint and then I added displacement to rigid body, in static general step every thing is fine and these two...

28 February 2021 3,442 2 View

Is there a deep reason for using the squared modulus of the wave function as the probability density of the existence of the particle?

I think we were all surprised at the first time we got to know quantum mechanics that the squared modulus of the wave function is the probability density of the existence of the particle? The role...

28 February 2021 6,282 9 View

How to modify Johnson cook equation in ABAQUS?

I wanted to add an extra parameter to the existing Johnson cook equation in the ABAQUS simulation. How to add those extra parameters. Ref: A modified Johnson-Cook material model with strain...

28 February 2021 4,841 3 View

For modelling epoxy-based matrices (in composites), which model in ABAQUS is the most suitable, Concrete damaged plasticity or Drucker-Prager model?

I am working on developing a micromechanical FE model for predicting kink-band formation in UD composites. To model matrix plasticity, which model, out of Concrete Damaged Plasticity and...

28 February 2021 5,415 1 View