How to distinguish betwixt the monotonic soil shearing and the cyclic shearing once interpreting the results of seismic undrained analysis of SSI?

Navid Yeganeh @Navid-Yeganeh

03 December 2018 0 8K Report

Soil-structure interaction

Direct method

Monotonic soil shearing

Cyclic soil shearing

Undrained effective analysis

Badges
Science topic

Similar topics
Correction

More Navid Yeganeh's questions See All

How two melting peaks in DSC of polypropylene can be merged into one crystallization peak?

The figure shows DSC cooling (blue) and 2nd heating (green) curves (step: 10 K/min) for a commercial sample supplied as Atactic Polypropylene (APP). The heating curve illustrates two major...

03 March 2021 5,857 3 View

Does anyone here uses the Software for Roche LightCycler 2.0 instrument?

Hi everyone, If anyone here uses Roche LightCycler 2.0 instrument for qPCR experiments, I would appreciate if they message me. I have some questions about it. Best - Navid

12 October 2020 6,234 2 View

What is an acceptable FDR% for proteomics data publication?

Is there an established convention on this? I have heard from experts that 1% FDR is recommended. I was wondering can we report protein IDs at 5% FDR. Is there any published guidelines on this? If...

25 August 2020 1,231 4 View

Does the expiration date affect the binding capacity of Ni-NTA?

Hello! I have some expired Ni-NTA resin (QIAGEN), and I need to purify my His-tagged protein. Does the expiration date affect the binding capacity of Ni-NTA? Thank you in advance

11 June 2020 5,773 5 View

How can concrete be modeled with a GFI in ABAQUS?

Hello dears I am modelling concrete in the Abaqus and need to know GFI behavior and parameters them. How can concrete be modeled to the ABAQUS? Thanks

03 March 2020 4,116 3 View

Is there any good free software to simulate electron trajectory in non-uniform electric field?

Need to simulate electron trajectory in non-uniform electric field.

08 February 2020 8,963 3 View

SST data format for WRF?

Dear all, I intend to use SST data for my WRF runs, but data are in binary format and I need to convert them to GRIB2 format. I appreciate if somebody with same experience help me solve the...

19 January 2020 9,829 3 View

New project in Cathodic Protection?

What fields (topics) do you suggest to work as a metallurgy and Technical Inspection master degree Student in Cathodic Protection? Thank you kindly

17 January 2020 4,201 5 View

Can anyone help me understanding the marginal cost calculation in this article?

Hi Can anyone here help me understanding the marginal cost calculation in this article? Cost and effectiveness of emissions trading considering exch... what is the index in summation notation...

16 January 2020 6,063 3 View

Should the effective stresses be constant during the effective stress numerical analysis?

Assuming running the undrained effective stress analysis in FLAC3D via Config FLUID using the effective stiffness and strength parameters, are we expecting the constant effective stresses in the...

15 July 2019 6,096 3 View

Why Austenite grains in steel show much more twinning than ferrite grains?

It is oftentimes said to be a distinctive metallographic trait that differentiates a fully austenitic and a fully felly ferritic steel without etching that might distinguish between two. Why...

02 March 2021 728 2 View

What is the most suitable server for predicting protein structures in bacteria?

I have used the i-Tasser several times, however it has been unavailable for several days. I tried the swiss-model, but the output was not very pleasant due to the model used. Is there any other...

28 February 2021 4,521 3 View

How to replicate the well conditions of a crystal hit with 20%(w/v) isopropanol?

I had a crystal hit in a well with 0.1M HEPEs pH 7.5, 10%(w/v) PEG 4000, and 20%(w/v) isopropanol. Why is isopropanol in w/v here if it's just solvent? How do I recreate this well condition?

25 February 2021 9,761 1 View

Can I use a protein-devoid condition as my negative control in ELISA?

Hello, I am running a sandwich-type ELISA where I am trying to inhibit a protein-protein interaction using small molecules. For each experiment, I determine my Z' (Z-prime) to determine the...

23 February 2021 7,429 1 View

How to search for crystal structure for material with atomic position labelled?

I am using the crystallographic open database and materials project to search for cif file but the exact structure is not mentioned or how can I deduce that the given structure and atomic position...

23 February 2021 6,723 2 View

Is this the write procedure for acid digestion of soil for heavy metal analysis using AAS?

How to do acid digestion of soil sample with 3:1 aquaregia in an open vessel?

23 February 2021 3,053 7 View

How to build fluid structure interaction simulation for elastic ring squeeze film damper in COMSOL?

22 February 2021 5,408 1 View

How to generate AA6061 alloy or any aluminium alloy crystal in material studio?

I need to carry out molecular dynamics simulation on Aluminium alloy. For this i need the crystal structure that which could be further replicated to form a structure.

22 February 2021 1,410 1 View

Are there packages (R or Python) for simple models (bucket?) to assess soil water content?

Hi everyone. I am researching droguht effects on soil water drought. I am looking for already implemented functions in R or Python to estimate soil water content from precipitation,...

21 February 2021 2,084 1 View

Which type of loading is to be used in dynamic analysis of Machien foundation?

Hello Everyone, Hope you all are doing well. I'm trying to simulate a machine foundation in ABAQUS with a geo-cell reinforced soil bed. Im totally confused to which type of loading would be...

21 February 2021 4,388 3 View