Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

How to calculate the annealing temperature of a primer pair?

I have to amplify a gene and my primers just reached. The Tm for Forward primer is 64.2, and that of reverse primer is 65.5. Can some one suggest how to get the best annealing temperature? Thanks...

01 March 2021 360 7 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

The reason that the culture of white fungi Contamination with green mold(Trichoderma), the culture autoclave at121 for 15 min. What is it?

Is the period to autoclave not enough? The inoculation in a hood and flame and UV and alcohol.

27 February 2021 9,356 3 View

How to include original NMR data in a manuscript?

hello. i am junior researcher. I received a comment from a reviewer that he could not find NMR data in my submitted paper. I had included the NMR graph with explanation and formula to calculate...

27 February 2021 734 4 View

Does different dilution factors affect negatively on NH3 reading ?

I have a sample of treated water sample & asked to obtain ammonia conc. in sample using a machine with 5-25 ppm detection range. However, upon testing with different dilution factors, all...

27 February 2021 8,483 3 View

Can anyone share his experience regards Smoothing in origin?

I am working on TiO2 composite material and the results of XRD have a lot of small/junk peaks and while I apply a smooth filter in Origin then the other characteristics peaks disappear so anyone...

26 February 2021 8,183 3 View

Why Trivalent chromium start precipitating above PH 5 ? Moreover discuss difference between adsorption of chromium and precipitation of chromium ?

I am a student of MS Environmental Engineering and started my research phase. I am working on metal removal ( chromium iii ) by using activated carbon prepared from the agricultural feedstock. So...

01 March 2021 5,475 2 View

Passivation of chromium cast Iron in high temperature?

14 February 2021 2,157 3 View

Is it possible to prepare clay minerals by mixing pure oxides of required elements? What would be theoretical difficulties with it?

Practically this is not at all necessary. But theoretically, would hydrous/hydrothermal synthesis be enough (like mix 1 mole alumina gel and 4 mole silica gel and gently heat) or would it require...

26 January 2021 6,403 3 View

Why Selenium nanoparticles synthesized by PEG 200 could not be scaled up ?

I could not synthesize Selenium nanoparticles by PEG 200 at up-scale ( more than 100 ml) as it got aggregated while at small amounts it works fine , I work with 850 PPM using selenium powder in...

08 January 2021 10,049 1 View

Please share some research papers on the synthesis of Mn3O4 nanoparticles via Hydrothermal method by using Manganese(II) nitrate hydrate?

05 January 2021 9,040 4 View

How to prepare selenium nanoparticles from selenium dioxide?

For the preparation of selenium nanoparticles mostly selenious acid is used however if someone try to prepare it from selenium dioxide what will be the proposed procedure or mechanism?? Is it...

07 December 2020 4,979 4 View

Wish journals in the waste water treament feald indexed scopus responds in a short time?

I need a journal that gives the answer in a short time for an article about the chromium disposal

03 December 2020 2,156 1 View

Reason for growth of fungus/mould in hydrothermal liquifaction filtered product of cellulose-based materials?

Performed hydrothermal liquefaction of cellulose powder, at about 200 degrees for 10 16 hours. After simple filtration, I stored filtered product at room temperature for 4-6 days, there is the...

03 December 2020 7,327 3 View

Which characterization techniques I should use to analyse chemical compound synthesized by hydrothermal synthesis ?

I have synthesized a ceramic-based nanomaterial by hydrothermal synthesis method. How I can confirm which chemical compound is formed. Should I go with the XRD analysis or any others?

24 November 2020 8,621 4 View

How can we set up Hydrothermal Liquefaction using solar/microgrid for extracting biofules?

Fo the conversion of biomass to biofuels, Hydrothermal Liquefaction is chosen.But the whole operation has to be from renewable energy source including the whole process most probably by solar and...

23 November 2020 9,432 2 View