I'm using silicone resin for paint formulation (zirconia as a filler material) and It doesn't cure at atmosphere and elevated temperature also. And I tried titanium 4 isopropoxide, it dried but film becomes flakes while exposed to 250 degree Celsius in muffle furnace. Resin was bought from dow chemicals, the technical data sheet attached below for your reference
Dear Abishek Palanivelu, the following chapter summerizes the different curing processes depending on the type of the resin. My Regards
https://doi.org/10.1533/9781845698058.1.66
Assuming that this is an alkoxysilane-sillo terminated siloxane, this is a moisture cure system. Failures to cure are gen really low humidity or too thick of a cross-section. You can catalyze these systems more effectively with dibutytindilaurate rather than Titans. See p22 of this link for more details: https://s3.amazonaws.com/gelest/product-brochures/Reactive_SIlicones.pdf
- Badges
- Science topic
- Similar topics
- Physical Sciences
- Materials Science
- Materials Chemistry
- Polymer Chemistry