How to Couple of Thermoacoustic Engine with linear alternator?

09 May 2024 0 8K Report

I am working on looped configuration, TAE1, Alternator TAE2 and TAR I want to know the best configuration with maximum efficiency

Note: The alternator must be NASA's linear alternator, not the loudspeaker

Badges
Science method

More Muhammad Umar's questions See All

Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

How to calculate the annealing temperature of a primer pair?

I have to amplify a gene and my primers just reached. The Tm for Forward primer is 64.2, and that of reverse primer is 65.5. Can some one suggest how to get the best annealing temperature? Thanks...

01 March 2021 360 7 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

The reason that the culture of white fungi Contamination with green mold(Trichoderma), the culture autoclave at121 for 15 min. What is it?

Is the period to autoclave not enough? The inoculation in a hood and flame and UV and alcohol.

27 February 2021 9,356 3 View

How to include original NMR data in a manuscript?

hello. i am junior researcher. I received a comment from a reviewer that he could not find NMR data in my submitted paper. I had included the NMR graph with explanation and formula to calculate...

27 February 2021 734 4 View

Does different dilution factors affect negatively on NH3 reading ?

I have a sample of treated water sample & asked to obtain ammonia conc. in sample using a machine with 5-25 ppm detection range. However, upon testing with different dilution factors, all...

27 February 2021 8,483 3 View

Can anyone share his experience regards Smoothing in origin?

I am working on TiO2 composite material and the results of XRD have a lot of small/junk peaks and while I apply a smooth filter in Origin then the other characteristics peaks disappear so anyone...

26 February 2021 8,183 3 View

Is it possible to do piezoelectric coupling in ANSYS-APDL or COMSOL between tapered substrate and rectangular piezoelectric patch?

How to do Piezoelectric coupling in ANSYS-APDL or COMSOL between tapered substrate and rectangular piezoelectric patch? Piezoelectric coupling between the rectangular substrate and rectangular...

02 March 2021 9,833 3 View

Can anyone help with an Accurate Diffuser Expansion Loss formula for rectangular shaped diffusers in turbulent flow regime?

I have tried Idelchik's Handbook of Hydraulic Resistance 4th Edition (2007 page 300) formulas and across some range the formulas are reported valid for, the law of conservation of energy is...

20 February 2021 2,504 1 View

How can you tell if your organotypic slice culture is healthy ?

I'm working on organotypic cerebellar slice cultures from postnatal rats and I'm not sure how to tell if the slices are healthy at any given point. I know there should be a lot of microglial...

15 February 2021 2,830 2 View

Reaction condition to convert NH2 to COOH?

I need to couple Dopamine by NH2 end to silica nanoparticles coated by PEG-NH2, but first i need to convert the PEG-NH2 to COOH by using succinic anhydrous ... can you suggest a reaction condition ?

13 February 2021 2,768 4 View

Coupled hydric and mechanical equation COMSOL?

hello i am trying to study the mechanical deformation due to the humidity on a 3d volume formed of 2 phases. my equation are dw/dt =grad(Dm*div(w)) and the mecanical is sigma=E*beta*nabla(w)....

27 January 2021 5,201 1 View

In abaqus, how to couple a reference point to a discrete rigid body?

I have two discrete rigid bodies. A axial connector was established to connect two reference points. Now the task is to attach the reference points to the respective rigid part. How should I do...

25 January 2021 5,079 3 View

How exactly modes are coupled into asymmetric directional coupler?

Currently I am reading one research paper regarding silicon based two and four mode division multiplexing for optical data transmission in 2 micrometer waveband. While reading I stuck at one...

21 January 2021 5,864 4 View

How to simulate Sloshing water using Dynamic mesh in ANSYS Fluent ?

I am trying to model sloshing water in a tank in ANSYS Fluent using Wall motion. BUT it seems that System coupling is not responding to wall motion and it works only with Dynamic mesh.

20 January 2021 2,963 3 View

Can you tell the pros and cons of the proposed active AC coupling circuit?

Are there analog circuit designers? Here is a small task for you. The active circuit below aims to improve the AC coupling in the biosignal amplifiers. Is that so? Are there any pros? I'm...

17 January 2021 3,548 14 View

What's the difference between light absorption and coupling in plasmonic metals?

What's the difference between light absorption and coupling in plasmonic metals? It seems that light absorbed in metal nanostructure/nanoparticles doesn't contribute to enhancement in electric...

14 January 2021 1,884 4 View