Hi, recently, I am doing power flow simulation research using detailed dynamic domestic profiles with pv panels. Only net real power, net apparent power, the solar real power and solar apparent power profiles are measured now. How can I conduct power flow simulation using these measured profiles? As I know, for static power flow simulations, both spot real power and reactive power are needed for simulation. Should I also use dynamic active power and reactive power profiles of domestic loads? Any ideas are welcomed~ Thank you so much!
Zheng Zhuang : Yes, you should consider both real and reactive power profiles for your load flow simulations. The domestic load is a combination of real and reactive loads, and if the domestic load is completely feeding off of the solar power, the inverter would have to generate power at a certain power factor to supply both the real and reactive demands.
- Badges
- Science topic