How the thermo-optic and thermal expansion coefficient of a etched fiber Bragg grating (FBG) changes compare with unetched fiber gratings?

06 May 2020 0 4K Report

Due to the etching technique, there will be a reduction in the diameter of the gratings. How this reduced diameter affects the thermo optic and thermal expansion coefficient of the fibre?

Badges
Science topic

More Koustav Dey's questions See All

Any leads on how Frequency Selective Scheduling is achieved in 5G Network?

Hi everyone, Does anyone know how Frequency Selective Scheduling is implemented in a 5G Network? A step-by-step understanding would be appreciated. Any references or articles will be good. Thanks.

30 July 2024 4,963 2 View

Is there any difference or enhancement in the usage/implementation of Proportional Fairness Scheduling in LTE(4G) and NR(5G)? Any articles or leads?

Any leads with proper explanation would be helpful.

02 July 2024 5,649 2 View

Can specific capacitance increases with increase in current density?

In my case , as i increase the current density the specific capacitance of the electrode is increasing. Also, I am getting the least capacitance in case of 1 A/g and maximum at 10 A/g. Can anyone...

19 May 2024 1,422 0 View

To isolate gingivaMSC,epithelial & fibroblast from biopsy tissue. Which protocol is best for the isolation process?what media is best for the same?

I have been trying various protocols, I was successful at isolating cells from tissue via both explant and enzymatic method, however after some days the cells are becoming stagnant and are not...

14 May 2024 8,846 0 View

How to do lncRNA annotation in R after making count matrix?

Can anyone please

30 April 2024 1,444 0 View

How to quantify the fluorescence intensity of a confocal image with Fiji (ImageJ)?

I have taken fluorescence images of the control and treated sample(Immunofluorescence, tissue sample) at the same settings. So I need to measure the change in fluorescence intensity of the treated...

16 April 2024 2,093 1 View

How much execution time is normal for completion of a tensorflow dataset generation function when working on a GPU accelerated workstation?

I am working on a deep learning model with following GAN(Generative Adversarial Network) architecture and got stucked on dataset creation(using tensorflow function to simplify the data for my...

05 April 2024 6,628 1 View

How to calculate and select the treatment dose for combination of two drugs ?

currently, i am working on cancer cells and trying to study the effects in combination. One is a known anticancer drug but the other does not show any anticancer properties however it can reduce...

17 March 2024 9,764 1 View

Not getting fiber deposition for electrospinning of Poly lactic acid (chloroform/DMF solvent) on collector. what can be the possible reason?

Hello everyone! I am preparing electrospun fiber of PLA in Chloroform/DMF solvent (9:1 ratio)...I am following standard reported protocol but i am not getting fiber deposition on collector much....

15 March 2024 4,608 2 View

What areas can be explored for undergraduate thesis research on Deep Learning on EEG?

I am inclined to research on EEG classification using ML/DL. The research area seems saturated. Hence, I am confused as to where I can contribute.

14 March 2024 7,060 1 View

Why does my protein refolded to beta sheet during thermal denaturation analysis?

Hi! So i attempted to understand a novel protein behavior towards heat application by analyzing its secondary structure change. I subjected the protein to a thermal denaturation analysis using...

06 August 2024 1,989 3 View

Expansion thermal of muscle ?

What is the thermal expansion coefficient of human muscle?

27 July 2024 7,190 0 View

How to get LP fiber modes directly from Comsol?

Hi there, I'm new to modelling with comsol. I would like to ask if it is possible for comsol to output linearly polarized (LP) modes? I tried modelling a simple single mode fiber with an enlarged...

23 July 2024 4,019 3 View

How can I extract glycosides from mangrove leaf samples without an incubator that can reach temperatures above 60°C?

I want to extract glycosides from my mangrove leaf samples, but my laboratory lacks an incubator capable of reaching temperatures above 60°C. The paper I am following specifies a minimum...

13 July 2024 3,686 0 View

How to introduce on fluent the optical loss of the wall due to the reflection of the plate towards the environment ?

"When solar irradiation reaches a surface, some of it is absorbed while the rest is reflected. Part of the light absorbed by the surface transforms into heat and increases the module's...

13 July 2024 8,621 5 View

Why am I seeing only one initial maximum in torque-time curves for the fusion of PVC in a Brabender?

We're studying the stability and fusion behavior of multiple PVC compounds in a Brabender. After a few trials, we set the temperature at 195 °C and the rotor speed at 70 rpm. Samples differ in...

12 July 2024 2,768 1 View

Is there any materials that can be as flexible and stretchable as PDMS, while also having a small linear thermal expansion coefficient?

For the PDMS material, it's linear thermal expansion coefficient is about 3.2*10-4/℃. The polyimide has a smaller linear thermal expansion coefficient like 2*10-5/℃, but it cannot be stretch. It...

04 July 2024 4,525 1 View

How to solve Bubble Error in fiber splicing?

I'm having a bubbling error while splicing 100/350 um optical fiber (core/cladding) on the Fujikura FSM100P+. I have tried some ways such as changing Prefuse power and Prefuse time but to no...

03 July 2024 7,463 6 View

Thermophysical properties of MWCNTs nanoparticles?

Is there any article can I find all thermophysical properties of MWCNTs nanoparticles especially, thermal expansion coefficient and electrical conductivity?

30 June 2024 4,075 2 View

Is the polymer has low CTE if the polymer has the high chain packing and small free volume?

I wonder the tendency of coefficient of thermal expansion (CTE) of polymer which has different chain structure. In my opinion, CTE will be higher when the polymer materials has high interaction...

30 June 2024 570 5 View