How much % of cellulose, hemicellulose, lignin in tissue paper?

08 February 2020 1 7K Report

i m aPG student of microbiology. i m working on biodegradation of tissue paper. need to knoe the basic chemical composition of tissue paper

Mina Karimi-Avargani

Tissue paper can be made from 100% chemical pulp, 100% recycled fiber or a combination of them. So, its composition can be different. I have attached the file which its component were defined according to the type of pulping

Badges
Science topic

More Amitkumar Shah's questions See All

Why Do TDS and EC Increase with Larger Wastewater Volumes, While BOD and COD Decrease?

I have carried out MFC experiments on three different volumes, 50, 500 and 1000 mL of wastewater. Results after MFC treatment shows that TDS and EC are more in larger volumes of water i.e. TDS and...

09 August 2024 9,621 0 View

How to enrich pig excreta for increasing nutrient quality organically ?

Pig slurry is rich in major and minor nutrients. Is there any way to improve / Enrich its manure quality to be used in agriculture organically ? please share your knowledge.

09 August 2024 5,605 2 View

Is it possible to plot the atom-projected band structure using GPAW?

Hi, I'm currently working on a project where I need to plot the atom-projected band structure using GPAW. I've been able to calculate the band structure for my material, but I'm having trouble...

07 August 2024 269 3 View

Unusual intensity drop in some sections of chromatograms in DDA?

Hi, we have measured tryptic peptides using both DDA and DIA method on QExactive. In DDA replicates i saw unusual intensity drops occurring at the same sections of chromatograms in DDA replicates...

07 August 2024 3,218 4 View

Leaf area of tomato ?

Hi How can this equation Ln(LA) = 1.038 + 0.89 ln(X) be applied to calculate the leaf area of a tomato? Can you explain with an example and what is the substitution of Ln and ln?

06 August 2024 2,508 2 View

Why did the authors extrapolate a phenotype that they experimentally proved in one bacterial strain across the whole genus of the organism?

I aim to be as skeptical as possible regarding whether a pair of orthologous genes results in the same phenotype in their different but related bacterial organisms under similar environmental...

05 August 2024 6,787 4 View

How to preform densitometry on SDS-page bands?

I ran a SDS-page of a bacterial lysate and I want to quantify protein concentration in a specific band. I was thinking of using a standards ladder or make some standards are different...

05 August 2024 9,805 3 View

XRD Analysis is showing only Calcium carbonate. It is not showing other compounds. Can anyone help me get the other compounds?

XRD Analysis is showing only Calcium carbonate. It is not showing other compounds. Can anyone help me get the other compounds

04 August 2024 3,019 3 View

Which solvent is better to dissolve with secondary metabolites extracted from fungi?

I work on MCF7 cell cell for anticaner purpose and I wa to do drug preperation the drug ( secondary metabolites extracted from Aspergillus) My question which solvent is better with these secodary...

03 August 2024 4,725 2 View

What are the limitations and challenges of using machine learning for predicting concrete compressive strength in practical applications?

Machine learning (ML) has shown great potential in predicting the compressive strength of concrete, an important property for structural engineering. However, its practical application comes with...

03 August 2024 2,546 2 View

Is it possible to use a safer acid instead of monochloroacetic acid to convert bacterial cellulose to carboxymethyl cellulose?

Hi, researchers, Is it possible to use a safer acid instead of monochloroacetic acid to convert bacterial cellulose to carboxymethyl cellulose?

29 July 2024 4,570 0 View

Environmental Impact of the Organic Manure Production Unit?

Does anyone have any case studies on the Environmental Impact of Organic Manure Production Unit? Environmental Impact of a Organic Manure Production Unit Facility is what I studied but...

16 July 2024 5,400 6 View

Kraft lignin and MMA(Methyl meth acrylate) free radical polymerization for synthesis of thermoplastics?

I am conducting free radical polymerization using Kraft lignin and MMA, with DMSO serving as the solvent and there is also an initiator. Following the reaction, I obtain a solution, but I am...

15 July 2024 9,827 1 View

Is the use of microcrystalline cellulose MCC 102 in direct compression technology justified, given the low flowability of this excipient?

Hello everyone reading this topic! It is well known that microcrystalline cellulose 102 is recommended for use in direct compression technology, however, like other grades, it has poor flowability...

08 July 2024 2,807 0 View

How is the deconvolution area method applied to determine the crystallinity of cellulose using X-ray diffraction (XRD)? ?

I use X-ray diffraction (XRD) techniques to quantify the degree of crystallinity in my samples, referring to the following formula (CrI=Acrystal-Aamph/Atotal ). using deconvolution area methods (...

06 July 2024 6,234 9 View

Can SimaPro be used to simulate/analyse Biodegradation of Specimens?

I am looking at ways to investigate the biodegradation of 3D printed specimen as part of my research. To what extent can SimaPro be used to do this? The idea is to demonstrate the biodegradation...

02 July 2024 2,730 2 View

Cellulose degradation rate in anaerobic digestion?

Hello, I am looking for (estimated) degradation rates of cellulose in a classic anaerobic digestion setup (meso or thermophilic, WWTP sludge, 30+ days of operation) to have an idea of the % of...

01 July 2024 5,867 5 View

I need to design FIBC (PP Woven Jumbo bag), PE liner and modified to be fully compostable Biodegradable waste upon lanfill to protect the evironment?

PP resin and PE resin is petroleum base from fossil we have to use in making our FIBC products, I am thinking of end of use, returned to landfill, by mixing particular master batch into our...

29 May 2024 2,569 2 View

Is water a good solvent for Non contact mode of Atomic Force Microscopy analysis of bacteria degraded lignin and carboxy methyl cellulose?

I am studying the surface topography of bacteria-degraded cellulose and lignin using the non-contact mode of Atomic Force Microscopy (AFM), which requires a solvent to make a dispersion of the...

21 May 2024 6,358 3 View

Can you suggest lab services in India for determination of cellulose hemicellulose and lignin content in plant biomass?

I want to know affordable lab services in India for the said analysis

13 May 2024 4,186 1 View