how much CO2 from the combustion of conventional diesel in GREET model 1.8c?

More Aryam Al-rikabi's questions See All

ISim , Vivado simulator , how to Calculate max frequency and clock cycles for Arty A7?

hello, I have built a logic circuit and i didn't use a clock inside my block, *Now I am trying to simulate that cct to calculate the speed or latency, the ISim or Vivado simulator in the...

18 November 2019 5,419 1 View

Xilinx System Generator: Black Box JTAG Implementation?

In the ISE design suit (14.7) there was no problems implementing the Black box to a JTAG model, but now it is important to use the Vivado, due to its many tools and facilities. Unfortunately...

18 March 2019 7,989 1 View

What FPGA board do you suggest?

What Device is best suited for DSP applications containing signal and Image processing? SoC or HLS might me included... I made a survey and I found Ultra96 is incomparable with any other FPGA...

25 December 2018 4,991 14 View

MicroBlaze VS ARM Cortex A9?

What would you buy for an integrated design that has loops and Logic that need to be implemented with a very high rate? What are the Pros and Cons of both?

13 December 2018 6,868 4 View

MicroBlaze VS ARM Cortex A9?

What would you buy for an integrated design that has loops and Logic that need to be implemented with a very high rate? What are the Pros and Cons of both?

11 December 2018 1,149 4 View

What FPGA board do you suggest?

What Device is best suited for DSP applications containing signal and Image processing? SoC or HLS might me included... I made a survey and I found Ultra96 is incomparable with any other FPGA...

11 December 2018 6,062 15 View

Xilinx or Altera ?

What FPGA company do you prefer? What are you using any of them for? What suggestions you can offer to improve any of them?

03 December 2018 2,835 20 View

What is the relation between coagulation bath concentration and the pore size of membrane via immersion method?

This question for polymeric &natural membrane

24 April 2017 3,340 4 View

What are the best resources to advance VHDL, FPGA, Artificial Intelligence techniques and their comparability to each other?

Matlab Simulink is the environment for the simulation and compile, is the any other one to build full system and download to the hardware, maybe perform a Co-simulation?

05 June 2016 2,694 0 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

Do interactions between biosphere, carbon cycle, & water cycle impact global warming & interaction between atmosphere & hydrosphere?

How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?

09 August 2024 3,291 2 View

Who of all of you will help TPEOM to re-originate the Earths atmosphere to it original 5 atmospheric elements/gases?

Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...

06 August 2024 8,716 0 View

Why results of ROS flurescence are negative as there was no bacteria within?

Hello. I am working on ROS production of two systems: system A is cerium oxide and hydrogen peroxide, system B is cerium oxide nanoparticle, hydrogen peroxide and potassium bromide. I did some...

04 August 2024 5,974 3 View

How can I separate graphene from amorphous carbon of similar particle sizes?

The starting material is a finely ground powder. Some particles contain more graphene than others.

30 July 2024 3,978 2 View

Question about combustion Kinetics ?

I am currently working on modeling FCC catalyst regeneration and have come across a point of uncertainty that I hope you can assist me with. In my previous models, I have utilized lumped kinetics...

30 July 2024 6,137 0 View

What are the perfect mathematical model for a solar-powered ship implementation?

A computational study of heat flux on cylindrical surfaces using CNT hybrid nanofluids

28 July 2024 4,985 1 View

Why semicircle of nyquist plot is not complete?

While I am doing HER, I noticed that nyquist plots of Electrochemical Impedance Spectroscopy (EIS) is not complete. Will it affect for the Linear Sweep Voltametry (LSV) data? However, I can found...

26 July 2024 7,542 4 View

Does it exist some special technique for cutting ceramic membranes for Cross-sectional FESEM images?

Does it exist some special technique for cutting ceramic membranes for Cross-sectional FESEM or SEM images?

25 July 2024 5,482 2 View

Anju Baroth

The thesis by Alexander Richard Saputa on

"FROM WELL TO WHEEL: A COMPREHENSIVE COMPARISON OF TRADITIONAL AND ALTERNATIVE VEHICLE-FUEL SYSTEMS" should help you.

https://scholar.utc.edu/cgi/viewcontent.cgi?referer=https://www.google.co.in/&httpsredir=1&article=1001&context=theses

Saad El-Sayed

here is the table from American Petroleum Institute report

Aryam Al-rikabi

Saad El-Sayed Anju Baroth

Thank you very much for your answers.