How to add a journal?

I would like to know how to register the journal Flora Montiberica (ISSN 1138-5952 - eISSN 1988-799X) in Research Gate.

02 March 2021 8,156 2 View

Is it possible to obtain a negative cronbach alpha?

Good evening everyone. If a questionnaire has 4 factors measuring different constructs as for example CAMI questionnaire measuring attitudes toward the mentally ill that has four factors:...

18 February 2021 3,223 3 View

Which plants and trees have the best ability to prevent the entry of particulate matter (PM2.5 and PM1) and nanoparticles in indoor environments ?

In recent years our group has highlighted the importance of trees and plants in public and recreation parks in large mega cities. However, we are interested in developing "green shields" to be...

05 January 2021 6,500 3 View

ISO antibody against BFP for FFPE IHC?

Suggestions and recommendations welcome. Any usage/protocol experience would also be helpful/appreciated. Cheers

22 December 2020 599 3 View

No title

Entre mi alumnado me encuentro con un alumno con problemas cognitivos donde no es capaz de expresar emociones ni gestionarla y me gustaria encontrar articulos y recursos para poder tratar con el...

10 December 2020 8,292 6 View

Which is the best software to do a finite element analysis for composite materials?

we also want this composite material to be able to be modeled for mechanical testing.

19 November 2020 2,069 4 View

PVDF membrane degradation?

Hi, I'm performing western blots on different samples and I'm facing a some problems after eletrotrasnfer with PVDF membranes. In general, during the incubations with the primary and secondary...

18 November 2020 6,412 7 View

Can the BMI be calculated in rats?

22 October 2020 2,727 5 View

How to properly apply Gaussian G3 method?

19 October 2020 4,623 3 View

Two way ANOVA with non normal data?

Good afternoon everyone. I would like to know your oppinion or advise for the following: I would like to compare the results of a variable measured with a likert scale. I have two (or three)...

19 October 2020 4,564 4 View

Sutter electrode holder leaking after applying positive pressure. How to fix?

I am using a Sutter electrode holder for my patch clamp experiments, but I'm having trouble keeping positive pressure inside my electrode due to a leak out of the back of the holder. I have added...

02 March 2021 5,829 1 View

What thickness need for ITO to use as conductive layer?

I want to do RF sputtering of ITO on glass substrate using magnetron sputtering. what thickness do i need to make it good conductive layer to use it for PSC. Moreover, whats about thickness of...

01 March 2021 395 3 View

Why is my platinum counter electrode getting dirty during electrodeposition?

I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...

27 February 2021 1,829 3 View

How does charge on working electrode changes with rising potential?

During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...

25 February 2021 7,994 3 View

How to troubleshoot Electrochromic Films and Electrochromic Devices?

I am trying to characterize an electrochromic system. The system uses ITO electrodes on glass, WO3 as the electrochromic film, and NiO as the ion storage layer. When I deposit NiO and WO3 and...

23 February 2021 9,592 2 View

How does elongation affect the resistance of an electrode?

What are the testing rate for electrodes recommended by ASTM for cochlear implants. I am currently doing the 15mm/min elongatio testing.

22 February 2021 1,515 1 View

Is that possible to do an impedance measurement without FRA module?

One of my colleagues said, "the impedance you can measure with the three electrodes and with the specific sequence varying the frequency" Is it possible to configure the potenciostat without the...

21 February 2021 418 2 View

Do you know this error? The experiment was stopped by a potential overload on Vs (auxiliary electrode)?

Hello everyone Do you have any information about this error 'The experiment was stopped by a potential overload on Vs (auxiliary electrode)' in Origamaster software? I tried everything possible,...

19 February 2021 3,152 7 View

Which compound is getting oxidized during bulk electrolysis with TFAA?

The experiment is really simple. When I do a bulk electrolysis with 1% TFAA (ACN solution) to get dihydrogen, what is going to be oxidized? (working electrode graphit, counter electrode platinum,...

18 February 2021 4,430 1 View

Not able to charge-discharge Li-ion coin cell at higher C rate ?

I am working on cathode material. I have made different Li-ion coin cell against Li metal using commercial available cathode materials such as LCO,LMO, LFP and NMC and also with the lab...

18 February 2021 1,450 3 View