Are you interesting in the model cards of 65nm CMOS transistors or in the full design kit ?

Bonjour Laurent, thanks for reply, I am interested by the full Design Kit of 65nm CMOS , I want to use it in simulation of an RF analog circuit (RFIC) in Agilent ADS 2009 software

Hi Raja,

you can find the full Design kit of TSMC 65nm with the MOSIS program. You just have to be approved by TSMC for your project.

Please check the link below

https://www.mosis.com/vendors/view/tsmc/65nm

Thank you Laurent

I have already begun the process of MOSIS program, it takes a long time, I need to confirm my simulation results the rather possible. I have already used the TSMC 0.18um design kit, but currently I do a design with 65nm, for that I need the design kit. Not the whole package, just the file that I can insert in Agilent ADS Libreary.

I think the only way to get this file is to wait the process of MOSIS program. 

HI Laurent

Thanks for your info. Any ideas that a PhD student can also request with the official email ID or need to do it by any Professor. Furthermore, roughly how much time they take to process it.

Usman

I think, your professor have to do the request process to MOSIS. I did it for my interns few years ago

Regards

Laurent ARTOLA

PhD research Engineer

Thank you Laurent,

Hi USMAN

in this link you will find the licensing instructions for 65nm CMOS design kit. All of the licensing and download actions are provided directly from MOSIS.

http://www.cmc.ca/en/Help/Licensing/MOSISDesignKitsandLibraries.aspx#_Toc266881322

Regards

Thanks Laurent and Raja

I would be more interested in any node under 30 nm. For Example, 20nm CMOS, FDSOI and FinFETs. Any link to request for such nodes with these techs?

Usman

Hi,

Synopsys promote this program where they offer a  design kit for a 32nm / 28nm generic technology.   Im not sure about the cost  or how to get access for students. 

http://www.synopsys.com/Community/UniversityProgram/Pages/default.aspx

Thank you Andrés,

Usman, if you are using cadence go through this link u have a contact here , u can ask for evaluation version.

http://www.cadence.com/partners/ip_program/tsmc.aspx

You can also find model cards of transistors in Bulk, SOI and FinFET technologies here.

http://ptm.asu.edu/

I've used them in couple paper such as

"Modeling of Radiation-Induced Single Event Transients in SOI FinFETS"

"Comparative soft error evaluation of layout cells in FinFET technology"

You could find and download them on my profile

Dear Laurent,

I used them too but how do you change the FinFET bulk to FinFETS SOI?

Thanks.

Usman

Asman,

You have many model cards provided by PTM on their website, we can find Bulk and SOI technology there

Regards

Laurent

Thank you Laurent for the link of model cards, it is quite helpful !

Hi colleagues

Would you mind give me a 65 nm pdk for RF analog circuit analysis by Cadance.

Dear Ghader,

it depend which level of integrated you are interesting in, but the CMOS065 from STMicroelectronics might be a good one. You can have access after a simple request to CMP : https://mycmp.fr/datasheet/ic-65nm-cmos065

Laurent Artola where can i find ads model for 65nm process. i have to design an LNA based on it. Most of the places do not provide it to students in india. how can i get one?

Debasish Dash you could find the electrical models of transistor on the following link

http://ptm.asu.edu/

Laurent Artola Can you comment on the accuracy of 65 nm models offered by PTM?