How do you control the durability of the Horn Coating for Ultrasonic Metal Welding for Batteries ?

Marouene Ben Messaoud @Marouene-Ben-Messaoud

07 April 2020 0 8K Report

Any tests that have been done , which shows how the horn's coating is affected by the number of cycles and also the Ultrasonic Metal Welding 's process parameters ?

Badges
Science topic

More Marouene Ben Messaoud's questions See All

How to improve results of system identification procedure?

Hello, I'm performing system identification of the lateral closed-loop dynamics of a quadrotor. My model receives a setpoint and should return position and acceleration. I've proposed a second...

07 February 2021 9,791 2 View

What is the maximum time duration allowed between photoresist coating and exposure?

I have coated the Silicon wafer with photoresist (AZ1518) but until the exposure (Laser Writer) I had to wait for more than a week (Laser Writer was not operative) - would the photoresist still be...

03 January 2021 9,640 4 View

What would happen if all nitrogen atoms in DNA were replaced by Carbon atoms ?

The DNA molecule is in the form of a double helix, The atoms which compose it are carbon, nitrogen, hydrogen, and phosphorus

02 January 2021 4,402 3 View

Which is more important for a journal? The impact factor or the quartile ranking?

I always found confusing both concepts! Which one do you think is more important? I give an example: The journal of "Theoretical and Applied Climatology" has an impact factor of 2.88, but it's a...

01 December 2020 8,608 19 View

Who can collaborate with us?

Salam (Hello)! We have prepared some new compounds with important potential to inhibit viruses. We are interested in inhibition of Hepatetis-B/C, Nipah, Nil and coronavirus. Who can collaborate...

22 November 2020 3,850 14 View

What is the most effective way to transfect HAP1 cells?

I am starting a project with the HAP1 cell line and previously our lab has had difficulty to transfect them. -we have nucleofection equipment - but have only been getting ~10% transfection -i...

19 October 2020 5,340 2 View

What effect do epidemics have on cerebral physiology?

How trauma and fear of infection can affect brain functions and structures?

10 October 2020 6,642 1 View

What are the XRD analysis conditions of the cement, sand and Limestone ?

I am a Phd student and I need to do XRD analysis on my pouder samples namely ( cement- sand- limestone and calcined clay). I was asked asked to specify the analysis conditions: -the nature of...

07 October 2020 5,737 6 View

Why I couldn't obtain a gel from APTES? Does the Amine group affect the gelation process?

I am trying to make a gel from APTES as a precursor using the sol-gel reaction. I tried different solvents (ethanol, acetone, DMF) and different catalysts (basic and acidic) with different...

03 October 2020 9,673 5 View

Best meta-analytic approach with Mean, SD, Sample size for regional values of MRI measure?

I'm interested in evaluting the evidence in the literature I've collected for spatial/anatomical variation in an MRI measure. The data consists of mean values, standard deviations and sample...

14 September 2020 8,910 1 View

Adherance of Polyaniline coating over stainless steel?

Is the electropolymerisation of polyaniline coating over stainless steel (SS) via Cyclic voltammetry technique is really adherant? Else how to improve the adhesion of the coating, whether any...

01 March 2021 8,220 2 View

How to size battery banks?

I am designing a small grid connected solar PV power-plant. As the battery's capacity is specified in Ah and demand in kWh. What is the best way to size the battery bank? I have battery price in...

28 February 2021 1,638 3 View

Is there a method of determining feed digestibility without the need to re-pellet the feed?

I am aiming to determine the ADC values of a commercial fish feed, but I do not have a steam pelleter or extruder available to me. Ideally, the pellets could be coated with some inert marker....

28 February 2021 7,967 3 View

How to model the battery pack in PSIM or PSCAD?

Hello, I have simulated a single battery cell using Thevenin equivalent circuit. For a battery pack, I have a large number of cells connected in series and parallel connections. Is there any way...

28 February 2021 2,116 1 View

How to immerse bricks in wax ( for coating ) ?

Do we immerse the bricks horizontally or vertically ? #bricks#waterproofingsurface#civil#engeenering#chemicalengineering#wax#parafinwax

28 February 2021 6,685 2 View

For gelatin coating for culturing HUVEC.Should the gelatin be made in sterile water or PBS? Do I need to autoclave the gelatin soln after making it ?

I want to use 0.1% gelatin. Should that be made in PBS or sterile water? Should I autoclave the gelatin soln after making it in water/PBS?

28 February 2021 274 2 View

Why is my platinum counter electrode getting dirty during electrodeposition?

I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...

27 February 2021 1,829 3 View

What pH condition required to coat APTES on silica coated Fe3O4?

It's a hydrolysis reaction, which may produce by either acid or base-catalyzed reaction. so can anybody help me with this, which condition is suitable for this reaction?

26 February 2021 1,760 8 View

What is the best surface to culture cells isolated from a skin biopsy?

Hello, recently I am having some difficulties with maintaining the cell culture of primary cells isolated from a skin biopsy (normal and malignant). The coating of culture plates with Matrigel (a...

26 February 2021 6,151 2 View

Unknown debris sheets observed in cell culture flasks?

Hi, We culture neural progenitor cells in T175 culture flasks coated with PLO-Laminin. We have successfully grown these cells with our protocol for months. Recently, we observed large sheets...

25 February 2021 3,443 4 View