08 August 2015 1 2K Report

I am facing a problem to find the the value mid frequency through the Bode plot while doing an experiment of the EIS? Please throw some light .......

More Sutripto Majumder's questions See All
What is the proper reason for the difference in the values Jsc from the IPCE and normal JV characteristics?

Working in the field of fabrication of the nano structured thin film for PEC as water splitting or as two terminal solar cell device facing the obvious problem of getting different values of the...

05 June 2019 7,950 3 View

Why results of actual theory are differ than its experimental values of charge estimation?

Can anybody help me out :- Why does it happen that in actual theory it seems that some material Why does it happen that in actual theory it seems that some material possess pseudo capacitance but...

08 September 2016 3,401 0 View

How can I calculate the resistance and capacitive percentage from CV curve for the supercapacitor electrode?

Can anybody help me out? There are so many papers regarding this, but not getting the clear concept

07 August 2016 6,818 13 View

Why there is a difference between the value of Jsc extracted through EQE and the value of Jsc of IV curve?

Can any body answer that why there is a difference between the value of Jsc extracted through EQE and the value of Jsc of IV curve?

10 November 2015 8,877 0 View

How to find the molarity of Na_2SeSO_3 for 150 ml of water?

I have made 0.8 M solution of Na_2SO_3 in 150 ml of  water and afterwords put 10 gms of Se powder into it. Now it is Na_2SeSO_3 is formed but I need to know the morality of the Na_2SeSO_3 solution...

05 June 2015 7,545 0 View

How to find the Rs and Rsh of a solar cell ?

from the J-V curve or the I-V curve for the light condition  of any solar cell applications.how to determine the Rs and Rsh at the point of Voc and Jsc or Isc from the curve only.

03 April 2015 5,880 6 View

Similar questions and discussions
Controlling for pupil light reflex when analyzing pupil size time course?

I used eye tracking to examine how participants from two different populations (A and B) react to an image. Participants in population A exhibit larger pupil sizes over time, but they also have...

10 August 2024 3,229 0 View

How are iso-frequency contours plotted?

Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...

07 August 2024 1,937 1 View

Z-average size from Dynamic Light scattering can it be lower than the original probe size?

Hi everyone, Recently I have been conducting Dynamic Light scattering experiments in a micellar solution at 5 and gel at 37 degrees of Celsius with latex particles of diameter 190-500 nm. While...

01 August 2024 1,168 4 View

What do you consider to be the most relevant elements of EEG for studying cognitive biases?

I've seen articles that primarily focus on alpha and beta activity in the frontal regions, but these studies often compare healthy subjects with those having various pathologies. I haven't seen a...

31 July 2024 7,259 1 View

While doing Chronoamperometry, when the light is turned off, why the current is not decreasing sharply?

Here, I have used Ag/AgCl as reference electrode and 0.5M KOH.

29 July 2024 4,538 3 View

Aqua regia not heating up?

I used Aqua regia to clean Au nanoparticles in the used glassware. But for some reasons, it is not heating up upon mixing. The color did change from no color to light orange. The Au NPs on the...

25 July 2024 4,390 0 View

I found the zeta potential of exosomes in DLS and it was -8mv. So is it correct or not ?

What should be the zeta potential of bovine milk exosomes

25 July 2024 7,376 5 View

Comparing Liposome Size: DLS Measurement vs. SEM Observation with Air Drying ?

I have an issue with SEM imaging of liposomes. When measured by DLS, they appear to be around 120 nm, but when using SEM with simple air drying, they appear much larger, around one micrometer.

25 July 2024 3,395 3 View

Is it possible to do transient simulation in HFSS in presence of magnetic biasing?

I have designed magnetic material with different biasing conditions in HFSS. Now I want to give an RF AC signal and do a transient simulation in HFSS. Is it possible to do in HFSS? Please help me...

24 July 2024 9,319 5 View

Can anyone kindly suggest research topics in the area of thermodynamics, heat transfer, fluid mechanics or renewable energy?

I am an undergraduate mechanical engineering student seeking suggestions on topics related to either thermodynamics, fluid mechanics, heat transfer or renewable energy for my final year project....

24 July 2024 4,058 5 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close