I have to measure the Vitamin C with the Acid Metaphosphoric (HPO3). Unfortunately, I only have Acid Phosphoric (H3PO4).
How can i sunthesize HPO3 from H3PO4?
NB: I think H20 is the key
You cannot make it from phosphoric acid easily, if at all. I'd recommend buying it.
Edit: You could do 2(H2O) plus P4O10 which will lead to 4(HPO3), but that sounds like more fuss than it's worth.
Diphosphoric acid is synthesized by heating the orto-acid to 215 degrees C.
2H3PO4 = H4P2O7 + H2O
If you heat H3PO4 to 316 degrees C, metaphosphoric acid is synthesized. It exists in cyclic and polymeric forms and has the brute formula HPO3.
HPO3 is very strong dehydrating agent that could be used instead of acetic anhydride in RDX, HMX, TNT and other synthesis.
It could be possible to prepare HPO3n from normal 85% H3PO4 (1, 5 dolars per liter) by heating (could it be concentrated to 100% by heating?).
Then 100% H3PO4 (melting point 42,3 degrees C) will be heated slowly to 316 C (electric stove will work).
Anyway it is unclear how long it must be heated to the upper temperature. To get 95% + yield ot HPO3n.
what do you think about HPO3 and H3PO4? do they hava the same effetcts on Vitamin C measure??
I'm not familiar with what you are measuring, but I'd expect HPO3 to form a cyclic phosphate with ascorbic acid. Phosphoric acid would probably do nothing to ascorbic acid since it is not electrophilic and it is not oxidizing.
Thank you Brennan. Since i can not get HPO3 from H3PO4, do you know other product similar to HPO3.
And what kind of reaction would have Acid ascorbic with HPO3? i guess both are reducers??!!!
Thank you
Dear peers, I need to know the exact composition of the Chrome azurol agar medium CAS (blue colored) to evaluate the siderophores production. Thank you.
16 February 2019 3,794 6 View
I want to stimulte spore production of an actinobacteria isolate in liquid growth media. Can you help me ?
15 November 2018 7,289 3 View
I'm currently analysing data of Inteleukin measurement with ELISA. Are you using 4PL Method? Which Software are you using? How can you verify if your Standard curve is correct with 4PL method?
29 October 2017 8,977 2 View
Dear all, I would like to know if it is possible to simulate more than one cloud provider in cloudSim. If yes, how to implement VM migration from one provider to another? Thanks
27 May 2015 4,816 4 View
I am very new to CloudSim. I want to simulate some failure answer that's why I have used workflowSim since it has ready example for failure. I would like to measure availability and reliability...
22 September 2014 6,278 2 View
Dear peers, I would like to estimate the growth of my bacteria strains on solid substrates but measuring the biomass dry weight is not an efficient method due to the difficulties in separating the...
01 January 1970 1,943 2 View
Dear all, I want to know please : 1)- How to dissolve L-Tryptophan since it is unsoluble in ethanol. Sme suggested me to use NaOH, would you please telle me what concentration of NaOH suould I...
01 January 1970 5,854 1 View
Approximate concentrations are require in compared with the WHO permissible limts
11 August 2024 2,723 1 View
Hey there, As a synthetic chemist delving into theoretical calculations for my imidazolium-based organic molecules, I would greatly appreciate any guidance on the appropriate input instructions...
09 August 2024 5,444 7 View
I'm currently working on calculating the collision cross section (CCS) for various ions, and I'm facing challenges when dealing with sodiated and multiply charged ions. Most of the resources I’ve...
08 August 2024 8,329 0 View
Hello What should be done to separate and identify organic acids in HPC when their RetTime is the same?Like oxalic acid with Propanoic Acid.or acids that have a very close RetTime.
07 August 2024 8,782 3 View
Dear readers, Thanks for your attention. I am wondering about the health economic problem of quantifying the value of interventions which a) prevent, b) improve symptom profile and c) ultimately...
05 August 2024 3,246 1 View
I used humic acid at 0.044 g/kg soil in my pot experiment. But finally, I have to recommend kg/ha. Each pot's soil weight was 11 kg. What is the solution?
02 August 2024 7,186 6 View
Hello! I have this scale which had 10 items initially. I had to remove items 8 and 10 because they correlated negatively with the scale, and then I removed item 9 because Cronbach's alpha and...
01 August 2024 4,606 7 View
Just bounced on me. Before statistically analysing significant difference, shouldn't we see if data fits normal distribution first? Is 3 replicates enough to testify the hypothesis of normal...
31 July 2024 8,141 13 View
Does anyone know of a module for the JAMOVI software that is capable of generating mean separations using the classic letters based on post hoc results (e.g., Tukey test)? If, as I believe, such...
31 July 2024 3,333 4 View
I am attempting to conjugate PEG to an amino acid at the C-terminus, for the purposes of producing nanoparticles. I have been told that PEG modified with amine groups can be used for this purpose,...
31 July 2024 2,033 1 View