How can we explain the decrease in fermi energy with the doping of nanoparticles in superconductors?

More H. T. Rahal's questions See All

Could you please provide papers on measuring the porosity of an electrode using electrochemical impedance spectroscopy?

porosity coating film EIS impedance

06 July 2018 275 1 View

How can i disperse NiO nanopaticles in HCl or NaCl solutions for corrosion tests measurements?what is the suitable surfactant?

corrosion inhibition Surfactant Dispersing nanoparticles mild steel corrosion acidic media

02 March 2018 3,409 5 View

What are some natural plant extracts that can trap calcium and act as EDTA?

calcium complex plant extracts

31 December 2017 3,934 3 View

What is the interpretation of high values of anodic tafel slope in Na2SO4...but its neither a passive nor a quasi passive ?

anodic tafel slopes

04 May 2017 3,206 1 View

How can we disperse nanoparticles in a solution for corrosion inhibition? Other than the use of ultrasonic dispersion?

nanoparticles dispersion ultrasonic corrosion inhibition

03 April 2017 3,313 5 View

How can we explain the increase and shift in solution resistance (Rs) of mild steel in H3PO4 with increasing temperature from 30 to 60 degree?

mild steel in 1 M H3PO4 shift in solution resistance reaction of Fe with H3PO4 EIS at different tempratures

31 December 2016 2,295 5 View

Why the addition of nanoparticles sometimes decrease the specific capacitance of superconductors?

neutral media nanoparticles supercapacitors

31 December 2016 7,438 5 View

How can we explain the icrease in the seebeck coffecient of superconductors with the increase of Nps conc till a max value then it decreases?

seebeck coefficient nanoparticles carrier concentration

11 December 2016 2,030 0 View

Please i need a full text article that explain the increase of thermopower of superconductors with the addition of Nps?

thermopower thermo properties nanoparticles

11 December 2016 8,065 1 View

Which is the better capping agent for NiP nanoparticles preparation EDTA or citric acid or PVA?and Why?

nanoparticles co-precipitation method EDTA PVA capping agent

10 November 2016 1,198 1 View

I need to image mesoporous silica nanoparticles that are in ~100 nm size and do high resolution TEM to look at mesopores. what grids should I use?

Need to image mesoporous silica nanoparticles using the TEM. Also, need high resolution TEM images to see the mesoporous structure. Kindly suggest what kind of grids to use. Thanks, Shatadru

02 March 2021 1,787 2 View

Can chitosan alone can act as a reducing agent for Cu(0) nanoparticle sythesis?

[Synthesizing Cu nanoparticles without using chemical reductants]

01 March 2021 8,359 1 View

What are the new 2D nanomaterials were used for Silver nanoparticles stabilization?

In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...

01 March 2021 2,207 3 View

What is the state of the drug inside solid lipid nanoparticles (SLNs)?

I am a little confuse with the mechanism of solid lipid nanoparticles (SLNs). The main point of encapsulating drugs into SLNs is because some drugs have low solubility in water. Therefore, SLNs...

01 March 2021 3,703 3 View

How to check the uv-vis absorption of nanoparticle by surface plasmon resonance?

I try to check the uv-vis absorption of Indium nanoparticle. Now I am measuring in solution, can I measure it in the form of a film?

01 March 2021 930 3 View

Distribution of particles in metal matrix?

How would define the "good" and "poor" distribution of particles within the matrix. Is there a quantitative solution to assess the distribution of the particles, which then having denotation of...

28 February 2021 7,397 8 View

How can I calculate the rdf of water molecules around 'Na' ions that are closest(adsorbed) to the nanoparticle(solute)?

Hi, I want to calculate the radial distribution function for water molecules around the Na+ ions adsorbed on the surface of a spherical nanoparticle using the gromacs trajectory dynamically? For...

28 February 2021 5,650 1 View

LEDs on Vis Light photo degradation of MB water sol via N doped TiO2 in a mini flume?

Good day to all, I have no experience with light emitting diodes. I am building a glass mini flume to demonstrate the photo degradation of Methylene Blue in water running over self cleaning...

26 February 2021 4,026 5 View

Can anyone share his experience regards Smoothing in origin?

I am working on TiO2 composite material and the results of XRD have a lot of small/junk peaks and while I apply a smooth filter in Origin then the other characteristics peaks disappear so anyone...

26 February 2021 8,183 3 View

Why there are two peaks while using the mie plot of Silver nanoparticle?

Hi, I am trying to learn the theoretical modelling of silver nanoparticle using the Mie scattering theory. After that, I discovered a software named Mieplot developed by Philip Laven, where it...

25 February 2021 7,493 6 View

prof V.S Muralidharan

if the nano particle is a metal there is no wonder

if it is a semi condcutor depends on whether n or p type

H. T. Rahal

prof V.S Muralidharan Thank you

Its a p type metal oxide nanoparticles

kindly look into Fermi levels of all semiconductors , judge your system

Best of luck

Thank you very much Prof.

Regards