How the oxidation of graphite takes place in side the nuclear reactor core?

Although, the reactor core is filled with He(helium). Is it possible to graphite is oxidized in long run of nuclear reactor.

08 September 2018 6,247 3 View

How to evaluate grain size in graphite in solid using SEM?

The micro-structure of graphite in SEM is like onion pulp or corn. The main point is how long or how to decide the grain boundaries. The measurement is also very easy. To decide the grain...

08 September 2018 8,539 11 View

Is it possible to hack the bio-aging process by natural gene stimulator?

Protandim and NRF2 stimulator do that. Any researcher want to add some thing, I cordially invite them. I am very thankful to your suggestion.

31 December 2017 5,504 4 View

What is the importance or drawback of free radical generated in catalytic process in our body?

Is the free radical able to age the cell and oxidative stress? How aging is related with the process? Is this related with the Bio-hacking the age code?

11 December 2017 8,130 0 View

How is NRF2 stimulator (Protandim) different from other antioxidant supplements?

NRF stimulator (Protandim) is different from other antioxidant supplements in the way it works. Instead of providing the body with additional dietary antioxidants (regular supplements fall into...

11 December 2017 8,215 2 View

What is Bio hacking the age code?

11 December 2017 5,512 0 View

What are the scope of Raman spectroscopy in characterizing CARBON allotropes?

How can I differentiate the different allotropes with the help of raman spectroscopy?

10 November 2017 4,643 3 View

What is the basic difference in between magneto-elasticity and magneto-striction?

Basically magnetostriction is a special case of magneto-elaticity. But I want to know more detail? kindly request you to give me more detail about this topic and please suggest paper.

10 November 2017 3,164 2 View

What is the advantage of hexahedral mesh over tetrahedral elements in finite element analysis using structural analysis?

Some times tetrahedral mesh is better and some times hexahedral mesh elements are approximate the material in better way. I want to know the conditions. Advantages and disadvantages of these type...

10 November 2017 2,211 10 View

How the magnetic field affect the sintering process in manufacturing of a material?

What are the mathematics which really helps to deduce the affect of phenomenon of sintering in a material processing. Does it affect its reliability.

10 November 2017 769 0 View

Looking for Materials with high thermal expansion coefficient and high temperature resistance?

03 March 2021 8,272 1 View

How the parameters (such as Mw, Chemical bonds, polymer bland and so on) affect the mechanic property of polymer (such as storage, loss modulus) ?

Anyone can recommend any books on such topics? Thanks in advance.

02 March 2021 8,457 2 View

Gel electrophoresis result for total RNA samples, 1.5 Agarose gel was used, How to improve the integrity of RNA?

Gel electrophoresis, RNA degradation, RNA extraction from fresh tissue

02 March 2021 5,433 5 View

Why Austenite grains in steel show much more twinning than ferrite grains?

It is oftentimes said to be a distinctive metallographic trait that differentiates a fully austenitic and a fully felly ferritic steel without etching that might distinguish between two. Why...

02 March 2021 728 2 View

What are anisotropic electrical and optical properties of a semiconductor due to?

In some materials, properties such as band gap, thermal conductivity differ along different crystallographic axes. What are the basics?

01 March 2021 1,923 3 View

What are the new 2D nanomaterials were used for Silver nanoparticles stabilization?

In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...

01 March 2021 2,207 3 View

1 nm thick MgO thin-film to be deposited on Si wafer using thermal evaporation. What will be the optimum deposition conditions?

Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.

28 February 2021 3,640 3 View

Why do a weight decrease for thermal degradation in nitrogen gas condition?

Hi all The question is related to TGA(Thermogravimetric analysis). Thermal degradation easily understood but why do samples weight decrease? altough just binding is broked, the weight of...

26 February 2021 1,100 5 View

Can thermal cycler machines be problematic during PCR?

Hi, my question is about the heating of thermal cycler machines and I hope some of you had experienced a similar thing previously. There are two thermal cycler machines in the lab(BioRad) and for...

26 February 2021 4,777 4 View

How does charge on working electrode changes with rising potential?

During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...

25 February 2021 7,994 3 View