Thermal reduction of graphene oxide.?

I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...

23 February 2021 4,155 4 View

How to resolve Gaussian error termination " Error termination via Lnk1e in F:\G16W\l103.exe" for TS(QST3)?

When I run the job for TS(QST3) in gaseous phase, it was completed without any error. But when I add water in CPCM model it terminated with an error: Inconsistency: ModMin= 2 Eigenvalue=...

21 February 2021 3,198 2 View

How can I calculate volume fraction of MWCNT from a nano hybrid composite ?

I am adding 0.1wt percent MWCNT to glass fiber epoxy composite and want to determine the volume fraction of the MWCNT from this composite but I don't know how to calculate it. can anyone help me...

09 February 2021 8,883 3 View

Functionality on MWCNT can possible without using vacuum oven?

I want to synthesis functional MWCNT from pristine MWCNT using acid treatment but I haven't vacuum oven for drying but I have a normal hot air oven. So may it possible to use hot air oven for...

02 February 2021 8,475 3 View

How to interpret multiple bell shaped curves in Kratky plot?

Hi, I'm trying to analyze a Kratky plot generated from my SAXS data. I am seeing multiple bell-shaped curves in my Kratky plot and I am not able to find any source to get relevant info on this...

20 January 2021 2,474 1 View

Lift off problem with Indium/Gold deposition?

Hi, I'm doing 5/40nm In/Au e-beam evaporation at rates 0.2A/s(for In),1A/s(Au) on lithographically(doubly coated 495k,950k PMMA e-beam resist) done Si substrate at base pressure 2e-6torr. I'm...

18 January 2021 7,550 4 View

How to Import .inp file from abaqus CAE to Ansys perfectly?

I am trying to import an Abaqus .inp file to Ansys but it does not import the whole assembly but only imports a single part. How to solve this.

17 January 2021 5,450 3 View

Can I know the reason for these non specific bands?

a PCR and gel electrophoresis was carried out to obtain the results. they are negative jak2 v617f samples (ref genome - NG_009904 )

13 January 2021 7,658 4 View

Which third party CFD Codes can be used for FSI Co-Simulation in Abaqus ?

Since Abaqus CFD is no longer available in newer versions what are other available codes for Fluid-Structure Interaction Simulation

11 January 2021 2,012 3 View

How to determine Viscoelastic and Hyper Elastic Material Properties for Abaqus by mechanical testing ?

I am studying about Impact load resistance property of Polyurea (Elastomer). With respect to this, I need to conduct tests on this material to evaluate its material model behavior as a...

29 December 2020 2,969 1 View

Solution of 2D convection diffusion heat equation using MATLAB ?

This is a polymer heating problem. Polymer enters at around 180C (x=0) in the barrel. Also barrel initial temperature is 180 (t=0). Some heat Is added along whole length of barrel q. We have to...

15 February 2021 3,887 1 View

Defining effective diffusivity in porous zone and non-porous zone?

Hi all, I am working on methanol steam reforming using packed bed for hydrogen generation. I am using FLUENT software for CFD simulation. In reference paper, authors mentioned that effective mass...

10 February 2021 6,104 1 View

How to match the XRD of a compound for which there is no JCPDS file ? Is there any other characterization to claim the synthesis of desired compound?

I have synthesized LiMgF3 using the starting precursors LiF and MgF2 via solid state diffusion method. Now I am looking for some characterization to claim the desired product, as there is no...

09 February 2021 921 3 View

Is it possible to have a diffusion of oxygen from the glass substrate (SiO2) into the absorbent layer during annealing process?

02 February 2021 382 7 View

How do you determine at what concentration of antimicrobial should you subject the pathogen to?

I am making an antimicrobial extract from fungal metabolite but the fungi are not known. So I don't know at what concentration I should subject them to but what I do know I will test them against...

07 January 2021 897 6 View

Has anyone done lab models on the influence of dead-end pores on mass transport in saturated flow?

Groundwater flows through voids and passages that are interconnected within porous media. Some of the pores are referred to as a dead-end pore space within the porous matrix. The presence of...

07 January 2021 3,590 3 View

Any recommendation to calculate time to dominant design emergence?

Any recommendation to calculate time to dominant design emergence?

01 January 2021 3,809 5 View

Are drones following the e-Auto industry technological trajectory or are they following its own?

* Are drones following the e-Auto industry technological trajectory or it is following its own? * Will drones diffuse faster than electrical vehicles? * Will it depend on the application?, What...

29 December 2020 7,379 3 View

How can I apply the eddy_parameter to the other dataset?

I have one DTI dataset, and I've applied two different reconstruction algorithms to it. Thus there were two datasets with the same anatomical structure but varying in sth like the artifacts and...

28 December 2020 2,745 3 View

How best can Agricultural Innovation be structured to ensure adequate uptake and farmers adoption?

Technology adoption rates amongst small-scale farmers in the Global South (e.g. Africa) remain low, even when scientific evidence shows that a particular technology is beneficial.

28 December 2020 4,786 23 View