The sample drop cast on IDT.
Use a low power oxygen plasma,Make sure that the power is low enough as not to heat up the gold electrodes too much or use acetone which is economical and it just takes few minutes.
Good Luck
You can use a variety of solvents if the adhesion layer between the glass and gold electrode is titanium.
the adhesion layer between the glass and gold electrode is titanium. what solvent can be used?
Dear research community, I am using a data file from DHS survey and I need to adjust for cluster sampling design. I am using SPSS version 27. When I weight the data based on the weights that have...
09 October 2020 1,383 3 View
I have already mentioned that i am one of the author of Mymensing med J 2014 Oct;23(4):770-773. Article titled "Association of infertile patients having polycystic ovarian syndrome with recurrent...
04 October 2020 2,148 1 View
Despite the time I have spent on GPOPS, I could not understand the application of static parameters. What are they? Can anybody present an example?
11 April 2020 1,388 3 View
Hello, I want to measure doxorubicin released in exosome samples using HPLC. Please let me know if you have a detailed protocol.
16 June 2019 3,406 2 View
I'm working with the first version of GPOPS, which is a software for optimal control problems. I know it uses SNOPT to solve problems, but it doesn't work correctly, and it stops convergence...
23 April 2019 4,238 2 View
Is it better to normalize input values when we use fmincon function in matlab?
06 April 2019 4,581 3 View
Hello, I'm trying to run multiple imputation on SPSS 25 with defined constraints, and am getting the following warning that stops the execution of the process: "After 100 draws, the imputation...
06 February 2019 9,709 2 View
correlation is enough for validity?
03 November 2017 2,415 5 View
11 June 2016 1,701 4 View
24 January 2015 9,693 6 View
I am using a Sutter electrode holder for my patch clamp experiments, but I'm having trouble keeping positive pressure inside my electrode due to a leak out of the back of the holder. I have added...
02 March 2021 5,829 1 View
I want to do RF sputtering of ITO on glass substrate using magnetron sputtering. what thickness do i need to make it good conductive layer to use it for PSC. Moreover, whats about thickness of...
01 March 2021 395 3 View
I have several question regarding the MOR; hope anyone help me better understand. 1- in CV using (KOH+MEOH) what is the indication of absence of the redox peaks? shouldn't they exist as a sign...
28 February 2021 4,851 8 View
What could be the reason of moisture at the sides of Vial when I am preparing my polmyer+DMSO solution for membrane fabrication? What etiquettes I am possibly missing here?
28 February 2021 6,516 5 View
I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...
27 February 2021 1,829 3 View
During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...
25 February 2021 7,994 3 View
I am trying to characterize an electrochromic system. The system uses ITO electrodes on glass, WO3 as the electrochromic film, and NiO as the ion storage layer. When I deposit NiO and WO3 and...
23 February 2021 9,592 2 View
I notice that upon washing and air-drying of my RGO/SPCE surface and characterizing again via DPV, the current response towards ferricyanide probe significantly decreases. My worry is that the...
22 February 2021 5,324 3 View
What are the testing rate for electrodes recommended by ASTM for cochlear implants. I am currently doing the 15mm/min elongatio testing.
22 February 2021 1,515 1 View
One of my colleagues said, "the impedance you can measure with the three electrodes and with the specific sequence varying the frequency" Is it possible to configure the potenciostat without the...
21 February 2021 418 2 View