How can i prepare sodium phosphate buffer ?

15 June 2019 0 4K Report

I need to prepare 50mM sodium phosphate buffer, so I would like to know which component and the concentrations. thank is advance

Badges
Science topic

More Walid Raafat Nakhlaa's questions See All

Could dyes amplify the spectrum of light to a specific wavelength?

I am interested to know the behavior of dyes toward light. Specifically, Blue dyes re-emit the spectrum, especially from the green zone (known as principal in LED lamps, and blue dyes are known...

05 August 2024 3,290 1 View

Can a Conventional 50W visible LED Lamp Emit UV Light?

I'm researching light sources and their UV emissions. I'm curious if a 50W, 7500K conventional LED lamp emits any UV light. I found that a 200W tungsten lamp can emit up to 1.5 mW/cm² at 350 nm....

31 July 2024 3,843 7 View

Would you please send me the license key for SmartPLS 04 software? I will be very thankful for this act of kindness..?

my email : [email protected]

13 April 2024 3,830 1 View

Entropy and time?

Which one dominate the other enrtopy or time?

25 January 2024 1,637 1 View

If time stops what happens to enrtopy?

let assume we are in spacecraft travelling in speed of light , droplet of ink drops in a cup of water ..theoritcally Time stops ! what is the behaviour of the droplet when it hits the water ?

24 January 2024 5,437 5 View

How calculte the force of a Car hits a wall ?

How to calculte the collision of a car with a wall with steady velocity (acceleration is 0)

24 January 2024 1,164 1 View

I want to fit Havriliak–Negami function for real and imaginary dielectric value in MATLAB or OriginPro. could help suggest me the build up equation?

I want to fit the Havriliak-Negami function for real and imaginary dielectric values in MATLAB or Origin software. Can anyone suggest the build-up equation? and how do I put initial guesses?

10 January 2024 5,467 1 View

Asking for research proposal ?

can you propose me a subject to procede my research ? i'am mechanical enginner holding master's degree in ENERGETICS

20 November 2023 6,068 2 View

Asking for research proposal ?

can you propose me a subject to procede my research ? i'am mechanical enginner holding master's degree in ENERGETICS

19 November 2023 6,461 2 View

Reduction to the Pole in the region of Notable Magnetic Field Parameter Fluctuations?

Dear colleagues, How to perform the Reduction to the Pole for a large study area where variations in magnetic field parameters (inclination and declination) exhibit significant changes? For...

17 August 2023 8,132 2 View

AMAXA Lonza nucleofection lower volume of buffer?

Does anyone tried to do nucleofection with AMAXA by Lonza with lower than recommended amount of buffer in the cuvettes (100 ul)?

07 August 2024 4,616 0 View

Why I can't see any band in SDS-PAGE?

Currently, when I run SDS-PAGE, I don't see any bands at all, even though I used the same material just a day ago and it worked fine.... In our lab, we dilute the 10X running buffer to 1X and...

06 August 2024 5,373 2 View

Why might the impedance values for DI water and 0.1X PBS buffer solution exhibit a decreasing and increasing trend, respectively over time (HP 4194A)?

Hello everyone, I'm encountering an issue with my electrochemical impedance spectroscopy (EIS) measurements and would appreciate some insights. Experimental Setup: Electrodes: Gold interdigitated...

05 August 2024 3,783 2 View

What is the best blank for nanodrop if I want to read a recombinant protein concentration?

Is it the "elution buffer" or the "dialysis buffer"? Note: I'll be using NanoDrop OneC

01 August 2024 967 3 View

EDTA buffer solution?

Hello everyone! How can i prepare EDTA buffer solution (pH 8.2) to determine GSH levels? Thank you in advance.

29 July 2024 4,374 1 View

Whether i can preserve leaves samples in 2.5% glutaraldehyde in 0.05 M phosphate buffer, pH 7 for coming several weeks for further LM study ?

I want to preserve the sample leaves for the LM study of the stomata and conidia analysis. Whether 2.5% glutaraldehyde in 0.05 M phosphate buffer with pH 7 can be applied for preservation.

29 July 2024 8,560 0 View

Sodium azide in immunohistochemistry?

Hello everyone, A collaborator sent us his protocol in order to be able to use his immunohistochemistry kits. But one step contains PBS + 0.3% H2O2 + 0.1% sodium azide. Knowing the dangerousness...

23 July 2024 6,314 3 View

Can a shoot-through event of a tri-state digital buffer cause momentary Hi-Z state?

// interested in the difference between floating events and short circuits.

22 July 2024 6,565 0 View

How do I prepare a working stock solution of 14C sodium bicarbonate to get a final activity of 3uCi?

I need to make a stock solution for radioisotopic incubations of freshwater sediments to study dark primary productivity but I have some confusion as to how I calculate the concentration of 14C...

15 July 2024 5,898 0 View

How can EDTA be removed from already extracted DNA samples?

Our lab has extracted bacterial DNA samples using Qiagen DNeasy kit and eluted the samples in AE buffer. However, this buffer contains 0.5mM EDTA not suitable for downstream application. Any ideas...

13 July 2024 1,675 3 View