In order to learn HVAC design course, which is the best institute in south India or is it better to learn an online course?

I wish to do a diploma in HVAC design, is it better to do an online course if so suggest me from where should I get my diploma from?

04 May 2018 4,270 0 View

Can i use cad software in order to analyze the Water contacting angle(WCA)?

Currently, i am working on a project related to hydrophobic coatings. The problem we are facing is with the equipment availability. is it a good practice to use CAD to know WCA. below is the...

03 April 2018 8,556 4 View

Will material properties depend on specimen parameters?

In order to find the variation in compressive strength for a nanocoated specimen compared with original specimen. I recently performed a test, the results obtain are not in accordance with...

03 April 2018 795 6 View

How should we determine the post coating Temperature?

In case of nanocoatings, whatever the mixture is( a mixture of nanoparticles/ or a mixture of liquids),how can we determine the temperature to be set after we coat the specimen. Here I refer...

02 March 2018 5,521 2 View

Will properties of a nanocomposite-coating change ,when it has low m.p constituents in its composition & is subjected to high temperature?

Should I be afraid of change in compositional variation, if the nanocomposite coating I'm concentration on with low m.p material constituents is subjected to high temperature?

02 March 2018 6,619 3 View

What could be possible reasons for cadmium rich nanocomposite to be evaporating during stirring?

i am working on a project related to nanocomposite coatings, one of the compositions we are concentrating on is rich in cadmium content. The problem arised when we tried to stir the solution of...

02 March 2018 2,319 13 View

Which Material can be a substitute for mild steel?

Kindly suggest me a material that could replace mildsteel with corrosion resistance , currently I am working on mildsteel specimen surface grinding it is a time consuming process .

01 February 2018 4,973 5 View

Can we design surface texture using 3d printing?

As a part of my project I am trying to find alternative methods that can produce surface texture in nanodimensions. Is there any possibility to do it using additive manufacturing

01 February 2018 4,002 2 View

What could be the easiest possible method to determine thermal conductivity of a nanocoatings specimen?

As a part of my project I wish to find thermal conductivity of nanocomposite coated specimen, what could be the easiest method to find it? Will an assumption related to concept of composite slab...

01 February 2018 9,428 4 View

Sample dilution for quantitative analysis using ELISA?

If the detection range is in ng/ml but the reference range is in ug/ml for a molecule or protein in serum or plasma .how to dilute and what is the initial volume to be taken for quantitative analysis

02 March 2021 7,670 3 View

Is There Any Feasible Method To Test Fluorescent Compounds Other Than Fluorescence Spectrometers ??

Is There Any Feasible Method To Test The Efficiency Of Fluorescent Compounds Other Than UV Spectrometers ? Suggestions Would Be Appreciated !

02 March 2021 5,785 3 View

Which is the most efficient etching solution for nickel based alloys?

Which solution reveals the microstructure and features of nickel-based alloys?

02 March 2021 2,221 3 View

What is Nano technology with coronavirus helpe the human..and is it nano mterals removal of covid19?

I anwar by adsorption or reaction ..but it is either more method...

02 March 2021 4,811 2 View

How to compare different concentrations of nanoparticles for characterization from ICP-MS?

I took measurements of different concentrations of 15 nm and 5 nm Au nano particle solutions. I'm trying to determine which concentration I measured gives the best reading overall. I also...

02 March 2021 7,626 1 View

Any research papers for extraction of nutrient deprivation on macroalgae? Analysed by HPLC-UV and GC/MS. Possibly from macroalgae genus Rhizoclonium?

I am doing my thesis on the nutrient deprivation on the macroalgae Rhizoclonium sp. I will be analysing the levels over a period of roughly 5 days by HPLC-UV and GC/MS. I will be using seawater as...

28 February 2021 6,477 1 View

LEDs on Vis Light photo degradation of MB water sol via N doped TiO2 in a mini flume?

Good day to all, I have no experience with light emitting diodes. I am building a glass mini flume to demonstrate the photo degradation of Methylene Blue in water running over self cleaning...

26 February 2021 4,026 5 View

Zno nano particles colour changed from white to grey in process of calcination any suggestions?

In the formation of Zno nano particles process, after drying at 120 degree C, my zno nano particles are completely white but when i calcine it for 450 degree C it converts into grey colour. i...

26 February 2021 2,435 4 View

How can I selectively dry etch Ti on a polymer substrate?

24 February 2021 5,378 1 View

IF troubleshooting: looking at an intracellular protein that localizes to the cell's and how to reduce increase in signal due to cell ruffles?

I am currently trying to stain for PI3KBeta in MDA-MB-231 cells. My current issue is that 1) beta stains all over the cell and 2) there is an increase in signal at the edge of the cell and this...

24 February 2021 8,582 1 View