How Can i know Core-shell nanostructure has been ِAchievied?

More Taha Al-Rashid's questions See All

Help me to identify these fungal slides?

These fungal slides are isolated from cultured Bread mold on PDA media and smear is treated with Lacto phenol Blue dye ..

13 July 2024 9,701 1 View

Query Regarding the Impedance EIS Data?

Respected All Research Members. Actulaay I faced the problem while analysis the EIS Data as i got the value of Z" negative. What should be the possible reason for this. Thank you in advance

03 July 2024 4,336 3 View

Can anyone suggest an adhesive that can sustain 600C?

I have to join tungsten wire to metallic plate with that adhesive and entire assembly has to be heated upto 600C in ultra high vacuum. I know about zirconia paste but it is not readily available...

18 June 2024 3,092 3 View

Kindly help me to identify this fungal slide ?

fungal inoculum treated with lacto phenol blue and observed under microscope anyone help me to identify and share some information regarding this fungal slide

07 June 2024 9,647 3 View

How the dropped packet is being transmitted in RPL DODAG?

I am implementing an enhanced objective function for RPL. Control messages and data packets of UDP applications are being transmitted. Now the question is that if any data packet which is being...

02 June 2024 3,418 2 View

In what specific applications are rotating heat pipes most advantageous compared to traditional heat pipes?

Explain your ideas

07 May 2024 4,553 2 View

Will it cause any problem to take 7% Margin of Error for determine sample size in Stratified Sampling Technique?

Greetings, I am Mamun. I just want to know that if I use 7% margin of error than will it cause any problem in future analysis? I am using stratified sampling technique, for this if i take 7%...

06 April 2024 2,344 6 View

What are the openly available data sources that may be gathered and used for research publications?

02 March 2024 6,825 3 View

How do I remove a publication that is not mine from my account?

In opening up my account, I accidentally picked publications that are not mine and I would like to remove it from my account. Please advise/remove them. and also close this account. I am running...

27 February 2024 7,549 0 View

Is it possible to get three or more than three kids/offspring from a single goat/doe as she comes in heat and met by more than two bucks, at a time?

simultaneously

24 February 2024 284 2 View

Using OBD technique i am trying to measure laser induced shockwaves velocity i found that at start velocity increases and then decay?

i am unable to interpret why its increases in start as shown in figure

11 August 2024 2,179 1 View

Hello researchers Is this a random laser or just fluorescence?

I am using Rhodamine6G as gain medium and silver nanoparticles as scatterers on a microscope slide and laser input 532 nm comes from above.

09 August 2024 9,894 2 View

I need JCPDS file of LSFCO nanomaterial. Can anyone provide me?

Require for Rietveld refinement in XRD.

08 August 2024 3,081 2 View

Why activated CAR-Jurkat cell could not kill targets?

Previously when I co-coluture anti-CD19(FMC63) CAR-Jurkat with Raji with E:T=5:1, Jurkat can eliminate Raji in 24h. However, when I test another CAR construct, although I can dectect totally CD69...

06 August 2024 641 2 View

Could dyes amplify the spectrum of light to a specific wavelength?

I am interested to know the behavior of dyes toward light. Specifically, Blue dyes re-emit the spectrum, especially from the green zone (known as principal in LED lamps, and blue dyes are known...

05 August 2024 3,290 1 View

Binder for ZnO nanoparticles in graphite paste electrode?

I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?

03 August 2024 4,624 3 View

I have synthesized a composite of ZnO and In2O3 with variations in ZnO content. In Raman , what is the peak observed at 130 cm-1?

Dear all, I have noticed, as the ZnO content increases, the Raman intensity at 100cm-1 also increases. However, there is a peak nearby at 130 cm-1, which I could not find in any paper related to...

28 July 2024 5,410 1 View

How should operational parameters be selected when developing a pore-free laser welding technology?

There are three operating parameters - the laser power, the diameter of the focus spot and the scanning speed. It is necessary to obtain a seam of a given depth without pores. What parameter...

27 July 2024 7,168 2 View

Can we fit a gaussian Fit on a LIBS Peak ?

Though much literature suggests fitting a Voigt profile on a LIBS peak, is it also possible to fit a Gaussian profile on the LIBS peak? I have 204 spectra files, and I am building a pipeline for...

23 July 2024 6,127 1 View

What is the suitable solvent of MIL-100 for chemotherapy?

I synthesised a nanocarrier by conjugation MOF (MIL-100) with folic acid for use in chemotherapy but the samples didn't dissolve completely in aqueous solution or DMSO. Instead, they only...

19 July 2024 8,522 0 View

Curtis Guild

TEM, TEM, and TEM! Best of luck on experiments!

Taha Al-Rashid

thank you so much for your answer. So how can i know this phenomena before do TEM, i mean can i know from UV-Visible or XRD?

Rinky Sha

no u cant get info without doing tem, as tem/ fesem is used to understand structural morphology wherein xrd /uv vis is used to characterize its chemical composition

many thanks for your answer.