How can I get PEG coated PLGA NP's in powder form?

More Bala Murugan's questions See All

Similarity between these two waveform? Similarity in terms of Shape?

Hi, These are the outputs generated by a system. Green-colored (nr) is desired output, while the system generates Red-colored (nf). I also have a dataset in CSV file. For this waveform, What...

21 January 2021 929 2 View

Which kind of GPC solvent can be used to dissolve both lipid and salt?

I want to find a GPC available solvent to dissolve both lipid (DPPC, 2 mM) and salt (NaCl, 100 mM).

14 January 2021 3,805 2 View

which material is used as base for thin film sample preparation in XRD analysis?

kindly guide me to prepare a Thin-film sample of nanoparticles for XRD analysis.

10 January 2021 3,744 4 View

Why is Statement of Problem one of the most challenging part of academic research? Why do supervisors pay more attention to it instead of methodology?

Some MSc and Ph.D. supervisors are having a lot of issues with understanding the Problem Statement of their students' research works. Sometimes, it leads to complete rejection of the whole...

04 January 2021 3,574 6 View

Hybridoma stops producing antibodies after thawing from liquid nitrogen?

Dear scholars, Our research is currently involved with hybridoma technology. We have isolated some original clones after fusion and we are preparing the subclone step to find some true positive...

01 December 2020 1,178 3 View

Anyone knows about .odb_f file generated by ABAQUS?

Hello all, I'm running a Bone Remodeling simulation in ABAQUS in which I just use basic ABAQUS Static simulations in every loop with an amplitude table to model the loading behavior & after...

19 October 2020 4,417 2 View

How to apply distributed load in a 2D model with plane stress/plane strain thickness in ABAQUS?

Hello all, I'm currently working on setting-up a 2D bone remodeling problem of a femur from literature. I take a 2D femur geometry and give it an out-of plane plane stress/plane thickness in...

06 October 2020 2,623 5 View

Is it possible to get a standard questionnaire or how to develop it, to measure perception & attitude of healthcare professionals towards investment?

I'm planning to adopted a standard questionnaire to conduct a survey that will measure the perception and attitude of healthcare professionals on investment and access to loans in the...

20 September 2020 4,911 2 View

In case of nanofluid flow within an enclosure, does the heat transfer trend follow the same trend as the thermal diffusivity of the nanoparticles?

I am trying to simulate the nanofluid flow within an enclosure for different nanoparticles e.g. Ag, Cu, CuO, Al2O3 and TiO2 . In the case of Ag and Cu, the heat transfer rate are almost same. I...

04 September 2020 7,988 7 View

How to calculate Aridity Index?

It's the measurement of degree of dryness but I'm bit confused with the values. Why is it lowest for hyperarid region and highest for sub-humid?

24 August 2020 8,920 11 View

Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

Is There Any Feasible Method To Test Fluorescent Compounds Other Than Fluorescence Spectrometers ??

Is There Any Feasible Method To Test The Efficiency Of Fluorescent Compounds Other Than UV Spectrometers ? Suggestions Would Be Appreciated !

02 March 2021 5,785 3 View

Can polymer concentrations be calculated based on the number average molecular weight?

Hello, I spin-cast two different polymers onto wafers and measure their height as a function of initial concentration. For polymer A, I have the weight-average molecular weight (Mw) as well as...

28 February 2021 7,882 2 View

What is the density for pva electrospining?

I'm Juan Carlos, a high school student who is working with electropinning, I made an electropinning machine with a 21g needle and a 30kv high voltage source and the distance between my needle is...

28 February 2021 298 3 View

Can impedance of antenna be less than 50 ohms?

I am simulating helix antenna in hfss, right now, giving excitation with 50 ohms port. When I see the results of Z parameter (real). It shows lower than 50 ohms. Do not understand, if it can be...

27 February 2021 4,218 7 View

No title

I am trying to find how to know the density needed for a pva electrospinning in a 0.6mm neddle, the electrospinning will be from top to bottom and the problem I really have is the solution because...

25 February 2021 2,615 3 View

What is the suitable range of Sulfur content and Viscosity of Heavy fluid Oil that used in Kiln?

What is the disadvantages of high sulfur content to the ceramic burning process? and what is the effect of outranged viscosity?

24 February 2021 8,219 2 View

Questio regarding micro/nano particles fabrication ?

I will start to fabricate micro/nanoparticles for growth factor release and I check out a procedure quite nice, however, it is lacking some details and since I don't have much knowledge doing this...

20 February 2021 199 2 View

Has anyone used deep learning for 2D/3D REGISTRATION ?

I am a Master student in Biomedical (Bio-electrical) Engineering and work on " 2D-3D registration ( CT and X-Ray) as my thesis. I created DRR from CT and want use CNN( Convolutional Neural...

19 February 2021 6,354 3 View

What type of pressure sensor are usually used in microfluidics?

My team is designing a dual channel microfluidic chip that runs air and water. I think we've decided on the NE1000 syringe pump for it's versatility and feedback control. We will be ordering the...

18 February 2021 9,928 2 View