I already know about mixing sol, prepared by aluminum salt (Aluminium chloride or nitrate) with active material powder. I am concerned about protecting Mn ions from reducing during mixing with sol with the low pH.
Hi,
just two guesses:
- spray drying
- mechanofusion in an high intensive mixer like Hosokawa Micron Nobilta
My cell is consist of Aluminium foil as one of my electrodes in an aqueous Li2SO2 solution in the neutral pH After applying voltage (positive bias), some corrosion spots has been formed on the...
09 October 2014 7,315 6 View
I am trying to find a good material to use as a coating with a very high overpotential for OER reaction
08 September 2014 749 9 View
I am trying to use a metal electrode in an electrochemical system in aqueous system. So I am not sure if this electrode work or dose NOT work. on the other words, I am not sure if it is corroding...
07 August 2014 228 11 View
I want to use a high voltage cathode in my battery and I also want to suppress oxygen evolution at high voltage. Can you guys give me some reference about understanding how to suppress oxygen...
03 April 2014 1,038 6 View
(Using Ionic Liquid containing Nitrogen is a usual method for coating) My plan is applying a protective coating on inorganic materials which is actually active material for Li-ion Battery.
03 April 2014 4,887 4 View
No matter what kind of carbon structures, I want to achieve to a carbon structure which can show hydrophilic behavior.
01 February 2014 7,180 11 View
I do not understand the point of half cell measuring of cathode or anode materials before testing them in a full cell. Any explanations or suggested literature?
11 December 2013 5,583 6 View
I am looking for something like a good recent review to give some general idea about hydrogen storage materials and the application of nanotechnology and nanomaterials for its improvement.
10 November 2013 9,825 4 View
I am looking for some references which are needed to understand basic and fundamental aqueous lithium ion batteries. Reading papers about case studies are too confusion for me at this point, I guess.
09 October 2013 6,019 2 View
I’m trying to reproduce the acousto-optic coupling simulation in the paper Frequency–angular resolving LiDAR using chip-scale acousto-optic beam steering. LNOI(lithium niobate on insulator) is...
13 August 2024 9,795 0 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 942 3 View
I did PR spin coating on trench structure. I used AZ P4620 PR and the thickness or PR is around 11um. The substrate is Si. And my trench structure depth is 141um(negative way). Even though I...
08 August 2024 2,298 0 View
I'm currently working on calculating the collision cross section (CCS) for various ions, and I'm facing challenges when dealing with sodiated and multiply charged ions. Most of the resources I’ve...
08 August 2024 8,329 0 View
I need to do some experiment with it in liquid form.
07 August 2024 613 3 View
I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.
07 August 2024 4,526 4 View
I have been working on Red blood cell-derived extracellular vesicles as Antisense Oligonucleotide (ASO) carriers. We normally run agarose gel to quantify the loading efficiency. I used naked ASO...
06 August 2024 3,130 2 View
It's an end-point PCR protocol. I'm using 1.5% agarose gel with SyBR Safe dye and TBE as a running buffer, visualization on BioRad XR+ system. I was primarily thinking of primer efficiency,...
01 August 2024 4,673 4 View
I am currently working on a project involving liposomes and need to determine the maximum volume of siRNA that can be added to a 2.5 mL liposome solution with a total lipid concentration of 10...
30 July 2024 6,420 1 View
I am trying to coat my micelles and PLGA based nanoparticles with cell membrane using an Avanti mini extruder according to literature . I use 200nm membrane but my particles end up to be 400nm And...
30 July 2024 3,294 3 View