How can I choose best Tafel region or fitting for HER to calculate Tafel slope?

Narreddula Manjula @Narreddula_Manjula

11 November 2017 0 5K Report

I have done LSV plot using 0.5M H2SO4 using reference electrode SCE. Which region is apt to choose Tafel fitting

Can any one help me!

I am here attaching one data file please suggest the area for fitting

Badges
Science topic

More Narreddula Manjula's questions See All

How to calculate how much reactant consumed (theoretically) when electrolysis was carried out for 10 hours?

When methanol-water (2M) electrolysis were carried out for 10 hours at constant current; how can we calculate how much methanol and water consumed theoretically?

08 September 2016 4,365 4 View

Analysis of organic solvents in water sample?

I have a water sample contaminated with various organic solvents like methanol, ethyl acetate, acetone, formaldehyde, formic acid etc. Which method can be used to find out what all solvents...

06 July 2016 1,042 8 View

How to do Dynamic calibration in DMA Q800?

In DMA Q800, Dynamic calibration includes loading of 4 steel samples of 0.005, 0.010, 0.020 and 0.030 inches. I have done calibration using all these steel samples. When I checked to analyze...

04 May 2016 8,234 4 View

How to do Temperature ramping test using DMA Q 800?

I need to calculate tan delta for a polymer sample (thin membrane of thickness 0.05mm), which is deformed at a particular strain and also ramped from room temperature to 300 C. To get a graph tan...

08 September 2015 1,980 4 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

Binder for ZnO nanoparticles in graphite paste electrode?

I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?

03 August 2024 4,624 3 View

How to find a reaction is reversible or irreversible in CV? How to know the number of electrons transfer?

My screen printed electrode CV is given here. For Nerstean one electron reaction the delta E value should be close to 57 mV and ration of Ic/Ia should be close to 1. I did CV of my screen printed...

30 July 2024 4,671 3 View

How to check pH of a high strength hydrogel?

We are working on biopolymeric hydrogels. Our system is highly viscous and sticky, and the gel formed are high in strength. We are unable to use pH electrode and pH strip. Please suggest an easy...

30 July 2024 942 2 View

While doing Chronoamperometry, when the light is turned off, why the current is not decreasing sharply?

Here, I have used Ag/AgCl as reference electrode and 0.5M KOH.

29 July 2024 4,538 3 View

Why semicircle of nyquist plot is not complete?

While I am doing HER, I noticed that nyquist plots of Electrochemical Impedance Spectroscopy (EIS) is not complete. Will it affect for the Linear Sweep Voltametry (LSV) data? However, I can found...

26 July 2024 7,542 4 View

Why do these abnormal charge/discharge curves of coin cell batteries appear?

As shown in the figures, there are several abnormal charge/discharge curves.Each of them may have different problems. I am curious why these situations appeared differently?There are a lot of...

24 July 2024 6,930 1 View

What binder would be the best choice to modify glassy carbon electrode with a 2D Material like Graphene or MXene?

I am trying to drop cast 2D Materials on Glassy Carbon Electrode for Cyclic voltametry and EIS purpose. What would be best binders to use?

23 July 2024 5,776 2 View

I obtain two plateu instead of one in LFP cathode assembled with graphite anode in 1M LiTFSI in DOL/DME, what does this mean?

I have attached the charging curve from the battery tester for review. I need help on what is happening

21 July 2024 6,898 2 View

I am working on III-V based tandem solar cells.Can anyone explain that solar cells work under forward or reverse biased conditions?

I want to know that n-doped side of solar cell is connected with positive or negative electrode.

20 July 2024 1,348 2 View