I tried to glue the zeolite particles on UF membrane such as PSF or Anodisc (Whatman Aluminum Oxide). After that I want to coat this substrate with a polymer solution. The important point for me is that the polymer layer should not form between zeolite and substrate. In the other words, zeolite particles should not be suspended in polymer solution. Therefore, I need to anchor zeolite on substrate.
Do it by anchoring agents which can bind the zeolite particles with the UfFmebrane:)
u create the surface of zeolite and UF memebrane the -OH groups which are found to be one of good covalent anchoring groups in such way that the linker shoyld attache from both the side l)
Dear Afsaneh, I sinthesized ferrierite membrane layers over high alumina spraying, the precursors on the substrate and doing the synthesis by hydrothermal method, and I obtained very good results, but I don't know if this method may works in your case.
Thank you both for your answers, they helping me gain different perspectives on the issue.
- Badges
- Science topic
- Similar topics
- Linguistics
- Composition Studies
- Publication