In my case,
heat source(MCE effect)= rho*Cp*(T_ad)/dt (W/m^3)
where Cp and T_ad is a polynomial function of temperature. rho and dt are constant.
I want to add this source term into Comsol Multiphysics as an input.
Can anyone suggest how can I do it?
Hello Prakash Singh,
1st define the rho and dt in parameters (as they are constant)
then, define the p and T_ad is a polynomial function of temperature in variable node,
then, go to heat transfer physics, add the heat sources term and define your "heat source term".
I hope this helps.
Regards
Gautam.
Prakash Singh yes, Seems okay. But define the condition 1st.
Already told you, for heat source(MCE effect)= rho*Cp*(T_ad)/dt (W/m^3)
1st define the rho and dt in parameters (as they are constant), along with their proper unit. [In definitions, in the component node]
then, define the p and T_ad is a polynomial function of temperature in variable node, [In definitions, in the component node]
In that heat source BC, type " rho*Cp*(T_ad)/dt"
If comsol doesn't take "dt" change the name and define the BC.
I hope this helps.
Regards
Gautam.
- Badges
- Science topic