We have a DAQ system (USB 2.0) for Bioware Type 5691A1 but we would like to synchronize the signal with EMG (acquired with PowerLab) and to live-visualise the force data. Is it possible with this kind of DAQ ? Do we need other system like "External Control Unit (8xBNC neg.) Type 5233A2" ?
Thank you in advance for your time and response.
Baptiste
You should use a digital Trigger (TTL) from Bioware to the PowerLab or vice versa. Then you got it synchromized.
Bioware has an Input and Output of TTL.
If you have channels free in the Bioware, you may input EMG signals into it, but could not Analyse it in the Bioware System.
best regards,
Oskar Schmid
Hi,
You can use a digital trigger from Bioware to the Power Lab. Then you should it synchronized. In any case, you can verify the availables channels of the system, but I think that you will be able to connect in the free channels (8 or 16) and you may input EMG signals into it.
I hope this helps.
- Badges
- Science topic
- Similar topics
- Mathematics