Hi, What is the difference with developed Open Architecture Controllers?

More Juan S. Toquica's questions See All

What is the density for pva electrospining?

I'm Juan Carlos, a high school student who is working with electropinning, I made an electropinning machine with a 21g needle and a 30kv high voltage source and the distance between my needle is...

28 February 2021 298 3 View

No title

I am trying to find how to know the density needed for a pva electrospinning in a 0.6mm neddle, the electrospinning will be from top to bottom and the problem I really have is the solution because...

25 February 2021 2,615 3 View

HPLC baseline failure (ACN/Water)?

My baseline increases without any explanation, it is only fixed by changing the solution B, will it be the column? Reagents? Bomb? Detector? Solution A: H3PO4 0.01% IN WATER Solution B: H3PO4...

21 February 2021 5,656 3 View

Algorithms to filter corrective max and min from a set of data?

I've got this 5 year Direct Normal Irradiance data I downloaded from https://re.jrc.ec.europa.eu/. I ordered this by year and by every 24 hours because I need the DNI curve by max in summer, min...

17 February 2021 2,777 5 View

How to improve the buffer capacity of sea water?

Hello everyone I would like to improve the buffer capacity of seawater (pH ~8) in order to dissolve as much CO2 as possible without dropping the pH below 7.5 (a range between 7 - 7.5 is...

17 February 2021 2,797 2 View

Resume Book UEP2013 Asian Edition, dis somebodey has it?

I am looking for a copy of the resume book of UEP2013 Asian Edition (Urban Environmental Pollution 2013 Asian Edition) held in Beijing. If somebody has it, please I would like to obtain an...

11 February 2021 2,247 2 View

How do they fill/replace metal hydrides in vessels?

Surely they will want to avoid contact with air/moisture, so what is the procedure for this?

23 January 2021 428 2 View

What type of spectral radiation has greater penetration on materials, UV or IR? What book or source do you recommend for information on this?

I need information concerning the penetration and reflection capacity of ultraviolet and infrared radiation wavelengths on different most common materials. Edit. Can somebody recommend a book to...

16 January 2021 8,051 6 View

What is the easiest and cheapest molecular magnet to synthesize at home and how can it be done?

im looking for a diy at home (home lab) molecular magnet in a chemical suspension that is stable at room temperatures and cheap

30 December 2020 626 1 View

What defines the time it takes to disconnect a molecular switch?

I have been thinking about a material that was made 6 months ago, which is a tetramethylsiloxane linked to a thiazolidinedione and finally to a naphthalene, but I can't find the original paper (if...

30 December 2020 5,347 1 View

Is stone a sustainable material? Is it a sustainable approach to use natural stone waste in architecture?

I'm designing a zero-waste restaurant and considering using marble waste to make some tables and a bar countertop. My clients think it's not "sustainable enough" and I would like to have more...

01 March 2021 4,326 7 View

Which fluorescent dye to use for measuring total ROS production?

Is DCFDA appropriate for measuring total ROS production, or can it only detect certain types of ROS? If I want to measure total ROS production, which dye should I use?

01 March 2021 9,447 3 View

Can anyone help with Schistosoma identification?

Can anyone identify what kind of Schistosome species this might be? Morphological features of cercariae and adults resemble Trichobilharzia, though I am fairly new to the field of parasitology...

25 February 2021 7,760 6 View

ANCOVA controlling baseline in RCT - how to perform power analysis and sample size estimation?

Hi, I have a simple question. I am hoping to perform a power analysis/sample size estimation for an RCT. We will be controlling for baseline symptoms, and using post-treatment or change scores as...

19 February 2021 2,648 23 View

Are there SDMs that can take in percentage data?

Hi everyone, I am wondering if anyone knows of a species distribution model that can take in percentage data (i.e. presence data with prevalence values attached to them)? The dataset I have...

18 February 2021 7,312 3 View

What is the significance of (isolated) high titers of IgG anti GD1a antibodies in an older patient with polyneuropathy?

Remote history of Campylobacter infection with reactive arthritis, and Spitz nevus (UMP). Arthropod exposure in Zika/ChikV endemic area prior to emergence of length dependent, sensory PN with...

18 February 2021 8,719 1 View

Which DL architecture is better to work on handwritten data?

I am working in the area of Handwriting recognition for Bangla. As there are many DL architecture, I am confused which one to select.

15 February 2021 4,996 1 View

Where would? can? positive charge(vacancy) be when grounded?

Hello I plasma(H2N2) treated Al2O3 plate (edge is connected to ground) and wondered if oxygen vacancy migration on the plate can occurs as electrons escape through edge. Or whatever positive...

15 February 2021 8,118 1 View

ZnS oxidizes to ZnO!!why??

when I put my ZnS solution in the chemical bath, the ZnS oxidizes so there are ZnO peaks appearing because of the reaction with the oxygen in the air, despite the fact that I close the beaker...

14 February 2021 5,778 9 View

Nuances in the digital twin concept. Opinions?

Hello everyone, I am currently working on the state of the art of the digital twin concept, and after seeing the categorization made by Kritzinger, W. et al. (2018) [Digital Twin in...

14 February 2021 2,107 3 View

Boyang Meng

I hope this will help.

1.this project is based on windows environment

2.the motion control is the key difference...user can define the detail of interpolation, such as pos,velocity, acc..ect

this is very different with OMAC, their motion control can only for use..user can not freely modified.

3.Usually, there are three type of OAC.

embed, motin control card, all software control. We are the third one.

If you are interested in this project.please leave your e-mail or something that we can communication more easily.

Juan S. Toquica

Hi,

I am very interested in this project. My e-mail is [email protected].

Regards.