Can someone guide me on the following:-
1. References I can use for ISHDT using the FEM method.
2. Stress computation process for Composite laminates.
Yes , you can use that
A sprinkler adds 15 cm of a bromide solution (i.e.,15 cm3 of water for each 1 cm of area) at a rate of 2 cm h-1. The volumetric water content (Theta) of the soil is 0.30 cm3 cm-3. Assume...
27 January 2024 7,107 1 View
Imagine you have a field with excessive salt buildup. Assume the volumetric water content is 0.35 cm3 cm-3 and the root zone is 120 cm deep. If the soil in the field is a clay loam soil with Ks=...
20 January 2024 6,449 4 View
HOMO-LUMO gap on solubility
29 June 2023 8,178 1 View
hi everyone I am doing Abaqus analysis during that I am facing several errors........ 1. Displacement increment for contact is too big 2. Strain increment is so large that the program will not...
20 February 2022 8,234 10 View
Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...
07 August 2024 1,937 1 View
What is the role of oxidative stress in toxin-induced carcinogenesis? I am currently researching the impact of environmental toxins on children's health and would greatly appreciate insights from...
02 August 2024 3,174 1 View
I am in search of a modified Hummer's method, which can be used to synthesis graphene oxide within 6-8 hours. As I am a student it is not allowed for us to work after 5 in the laboratory. So I am...
01 August 2024 8,368 2 View
Google scholar isn't giving me any results on this
27 July 2024 595 2 View
i compare between the antioxidant and oxidative stress level between negative control rats (saline) and CCL4 intoxicated rats. i found the level of GSH and TAC is more in toxic group than normal....
26 July 2024 1,887 0 View
The aim of the research here is to prevent the propagation of the crack in the fabricated elastic medium with useful applications.
25 July 2024 9,976 3 View
"The Correlation between Nutrition and Transport Mechanism under Abiotic Stress in Plants: A Comprehensive Review" by Muhammad Saleem, Jianhua Zhang, Muhammad Qasim, Rashid Iqbal, and Li Song,...
23 July 2024 9,109 0 View
I know that films and other low-thickness laminated products are produced using biaxial orientation, but is there something similar for sheets with a thickness of around 6 mm? Or are they...
21 July 2024 1,559 1 View
Phase quantification in steel contain BCC and FCC
20 July 2024 8,150 7 View
I am trying to configure the instrument in Profex but I can't get a chi-squared value below 9.65 for LaB6. This is the configuration of the equipment, which is a Bruker D8 Advance with a Linxeye...
14 July 2024 4,767 1 View